Jeep 2010 Compass - Owner Manual User Manual
Page 47
Advertising
![background image](/manuals/637367/47/background.png)
3. Route the shoulder belt to the inside of the right head
restraint.
4. When the belt is long enough to fit, insert the mini-
latch plate into the mini-buckle until you hear a “click.”
5. Sit back in the seat. Slide the regular latch plate up the
webbing as far as necessary to allow the belt to go around
your lap.
6. When the belt is long enough to fit, insert the latch
plate into the buckle until you hear a “click.”
Routing The Rear Center Shoulder Belt
Connecting Mini-Latch to Buckle
46
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
Advertising
This manual is related to the following products: