Starting procedures, Manual transaxle – if equipped, Automatic transaxle – if equipped – Jeep 2010 Compass - Owner Manual User Manual

Page 278

Advertising
background image

STARTING PROCEDURES

Before starting your vehicle, adjust your seat, adjust both
inside and outside mirrors, and fasten your seat belts.

WARNING!

Never leave children alone in a vehicle. Leaving
unattended children in a vehicle is dangerous for a
number of reasons. A child or others could be seri-
ously or fatally injured. Do not leave the key in the
ignition. A child could operate power windows,
other controls, or move the vehicle.

Manual Transaxle – If Equipped

Before starting the engine fully apply the parking brake,
press the clutch pedal to the floor, and place the shift
lever in NEUTRAL.

NOTE:

• The engine will not start unless the clutch pedal is

pressed to the floor.

• If the key will not turn and the steering wheel is

locked, rotate the wheel in either direction to relieve
pressure on the locking mechanism and then turn the
key.

Automatic Transaxle – If Equipped

The shift lever must be in the PARK or NEUTRAL
position before you can start the engine. Apply the brakes
before shifting to any driving gear.

NOTE:

You must press the brake pedal before shifting

out of PARK.

Tip Start

NOTE:

Normal starting of either a cold or a warm

engine is obtained without pumping or pressing the
accelerator pedal.

5

STARTING AND OPERATING

277

Advertising
This manual is related to the following products: