Operation – Jeep 2012 Grand Cherokee SRT - Owner Manual User Manual

Page 424

Advertising
background image

This system can also provide you with more control
during passing, city driving, cold slippery conditions,
mountain driving, trailer towing, and many other situa-
tions.

Operation
When the shift lever is in the DRIVE position, the
transmission will operate automatically, shifting between
the five available gears. To engage AutoStick

௡, simply tap

the shift lever to the right or left (+/-) while in the DRIVE
position, or tap one of the steering wheel-mounted shift
paddles (+/-). Tapping (-) to enter AutoStick

௡ mode will

downshift the transmission to the next lower gear, while
using (+) to enter AutoStick

௡ mode will retain the current

gear. When AutoStick

௡ is active, the current transmission

gear is displayed in the instrument cluster. In AutoStick

mode, the transmission will shift up or down when (+/-)
is manually selected by the driver (using the shift lever,

or the shift paddles), unless an engine lugging or over-
speed condition would result. It will remain in the
selected gear until another upshift or downshift is cho-
sen, except as described below.

• Normally, in AutoStick௡ mode, the transmission will

automatically shift up when maximum engine speed is
reached. If, however, AutoStick

௡ is engaged while in

the “Selec-Track” SPORT or TRACK mode, the trans-
mission will remain in the selected gear even when
maximum engine speed is reached. The transmission
will upshift only when commanded by the driver.

• The transmission will automatically downshift as the

vehicle slows (to prevent engine lugging) and will
display the current gear.

• The transmission will automatically downshift to first

gear when coming to a stop. After a stop, the driver
should manually upshift (+) the transmission as the
vehicle is accelerated.

422

STARTING AND OPERATING

Advertising
This manual is related to the following products: