Jeep 2012 Grand Cherokee SRT - Owner Manual - Manual (Page 502)

5. For a rear tire, place the jack in the slot on the rear
tie-down bracket, just forward of the rear tire (as indi-
cated by the triangular lift point symbol on the sill
molding). Do not raise the vehicle until you are sure the
jack is fully engaged.
6. Raise the vehicle by turning the jack screw clockwise.
Raise the vehicle only until the tire just clears the surface
and enough clearance is obtained to install the spare tire.
Minimum tire lift provides maximum stability.
Lift Point Symbol On Sill Molding
Rear Jacking Location
500 WHAT TO DO IN EMERGENCIES