To set a desired acc speed – Jeep 2012 Grand Cherokee SRT - Owner Manual User Manual
Page 202
Advertising
To Set A Desired ACC Speed
When the vehicle reaches the speed desired, push the
SET - button and release. The EVIC will display the set
speed.
Remove your foot from the accelerator pedal. If you do
not, the vehicle may continue to accelerate beyond the set
speed. If this occurs:
• The message “DRIVER OVERRIDE” will display in
the EVIC.
• The system will not be controlling the distance be-
tween your vehicle and the vehicle ahead. The vehicle
speed will only be determined by the position of the
accelerator pedal.
ACC Set
200
UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Advertising
This manual is related to the following products: