Engine oil – Jeep 2012 Grand Cherokee SRT - Owner Manual User Manual

Page 522

Advertising
background image

CAUTION! (Continued)

Your vehicle has been built with improved fluids

that protect the performance and durability of
your vehicle and also allow extended maintenance
intervals. Do not use chemical flushes in these
components as the chemicals can damage your
engine, transmission, power steering or air condi-
tioning. Such damage is not covered by the New
Vehicle Limited Warranty. If a flush is needed
because of component malfunction, use only the
specified fluid for the flushing procedure.

Engine Oil

Checking Oil Level
To assure proper engine lubrication, the engine oil must
be maintained at the correct level. Check the oil level at
regular intervals, such as every fuel stop. The best time to

check the engine oil level is about five minutes after a
fully warmed engine is shut off or before starting the
engine after it has sat overnight.

Checking the oil while the vehicle is on level ground will
improve the accuracy of the oil level readings. Maintain
the oil level in the “SAFE” range. Adding one quart of oil
when the reading is at the bottom of the “SAFE” range
will result in an oil level at the top of the “SAFE” range
on these engines.

NOTE:

Fill engine oil one quart at a time.

CAUTION!

Overfilling or underfilling will cause oil aeration

or loss of oil pressure. This could damage your
engine.

(Continued)

520

MAINTAINING YOUR VEHICLE

Advertising
This manual is related to the following products: