Kendon Single Ride-Up SRL Stand-Up User Manual
Page 10
714-630-7144
www.KendonUSA.com
- 8 -
There are two (2) Ramp Pins and they are both the same. One (1) ramp pin
unites the ramps at the top and one (1) unites the ramps at the bottom
creating one connected loading platform.
Hook each ramp to the rear folding section of the trailer going in the
following order: Left, Center and Right ramp.
Each Ramp Hook needs to face up like a spoon and the expanded metal
deck needs to be on the top of the ramp (pointing up towards the sky).
Once the ramps are attached, slide a ramp pin through each of the three (3)
ramps making sure the pin goes all of the way through so that the lock button
is popped out on the opposite end of insertion point. Note: The Ramp Pins
can be installed from either side. Align ramps with pins by hand as you thread
the pins through all three (3) ramp sections.