Kendon Single Ride-Up SRL Stand-Up - Manual (Page 13)

714-630-7144 www.KendonUSA.com
- 11 -
Proper Ramp Storage
Before the ramp pins can be slid out, you will need to depress the lock button
at one end of each pin. Once the lock button is pressed, you can slide the
ramp pins out. Repeat this procedure for both top and bottom ramp pins.
Detach the ramps from the rear section of the trailer. Attach ramps back on the
trailer in their original positions being careful that side ramps do not overlap the
rear folding section of the trailer. Ramps must be forward of the rear hinge
section to be able to fold up and stand up the trailer.