KMC Controls BAC-14xx63 Series FlexStat - Manual (Page 9)

BAC-12xx63/13xx63/14xx63 Series FlexStat 9 Installation Guide, Rev. C © 2013 KMC Controls, Inc. 913-019-21C
Important Notices
The material in this document is for information
purposes only. The contents and the product it
describes are subject to change without notice.
KMC Controls, Inc. makes no representations or
warranties with respect to this document. In no event
shall KMC Controls, Inc. be liable for any damages,
direct or incidental, arising out of or related to the
use of this document.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation. A BAC-12xxxx Class B digital
apparatus complies with Canadian ICES-003. A
BAC-13xxxx/14xxxx Class A digital apparatus com-
plies with Canadian ICES-003 Class A.
Fan Coil Unit (FCU)— Other Options
N.O.
N.C.
(4-PIPE 2-POSITION FCU OPTION)
VEP-1xxx0186/VEZ-4xxxxMBx
Valves with 24 VAC Actuators
XEE-6311-050 Transformer
BRN (VEP Series) or RED (VEZ Series)
BLU (VEP Series) or BLK (VEZ Series)
(See Wire
Colors
Above)
(2-PIPE MODULATING FCU OPTION)
VEP-45xxB745/
VEB-43xxxBCK
Valve with
MEP-4002 0–10
VDC Actuator
XEE-6311-050 Transformer
STE-1454 Temp. Sensor
(2-PIPE 2-POSITION FCU OPTION)
XEE-6311-050 Transformer
VEP-1xxx0186/VEZ-4xxxxMBx
Valve with 24 VAC Actuator
BRN (VEP Series) or RED (VEZ Series)
BLU (VEP Series) or BLK (VEZ Series)
STE-1454
Temp. Sensor
NOTE: See the FCU—Overview section on the
previous page for the 4-Pipe Modulating
option and the general schematic.
KMC Controls, Inc.
19476 Industrial Drive
New Paris, IN 46553
574.831.5250; Fax 574.831.5252
www.kmccontrols.com; [email protected]
Additional Resources
The latest support files
are always available on the
KMC Controls web site
( www.kmccontrols.com ).
To see all available files, you
will need to log-in to the
Partners site
For specifications and
accessories, see the BAC-
12xxxx/13xxxx/14xxxx
Series FlexStat Data Sheet .
For operation, configura-
tion, troubleshooting, and
other information, see the
FlexStat Operation Guide .
For additional wiring, ap-
plication, and programming
information, see the Flex-
Stat Application Guide .
For additional instructions
on programming, see the
Help system for BACstage
or TotalControl.