KMC Controls IEI-1001 - Manual (Page 2)

SAE-1000/1100 CO Detectors 2 Installation Guide
KMC Controls, Inc.
19476 Industrial Drive,
New Paris, IN 46553
574.831.5250
www.kmccontrols.com
[email protected]
© 2009 KMC Controls, Inc. 717-019-07B
Maintenance
Careful installation will also ensure long-term reli-
ability and performance. Remove dust as necessary
from sensor holes in top and bottom.
CO Detector Compatibility
Because of changes in the CO detector boards,
current models of LCD displays are only compatible
with these models:
SAE-1101 CO sensor (after 5/2007)
SAE-1102 CO sensor w/ relays and alarm
(after 2/2007)
SAE-1151 CO sensor (after 12/2006)
SAE-1152 CO sensor w/ relays and alarm
(after 11/2004)
Earlier models of CO detectors (with a row of LEDs
on the left side of the board) require the earlier
models of displays.
Board/display incompatibility results in a blank or
garbled display.