Koala Kare 740-KIT - Manual

Tools Required:
Phillips Head Screwdriver
Classic High Chair
1. To remove the restraint strap, unscrew the
two chafe tabs at back and pull the straps out
through the slots. Discard the old strap and
screws.
2. To install the new strap, thread the chafe
tabs back through the slots. Using the Plastite
Screws provided, tighten the screws into the
back of the chair seat.
Bistro Chair
1. To remove the restraint strap, unscrew the
two chafe tabs on the underside of the chair.
Discard the old strap and screws.
2. To install the new strap, lay strap flat on the
seat of the chair, bring the chafe tabs around
to the underside of the chair seat. With the
Modified Truss Head Wood Screws provided,
tighten the chafe tabs into the underside of the
chair.
CLASSIC HIGH CHAIR AND BISTRO REPLACEMENT STRAP INSTRUCTIONS
Active Restraint Strap for the KB103 Classic High Chair and
KB317/318 Bistro High Chair
P/N 740-KIT
Lay strap
flat on
seat.
Chafe
Tab
Koala Kare Products ǁ 6982 S Quentin St. ǁ Centennial, CO 80112 Toll Free: 888.733.3456 ǁ 303.539.8300 ǁ Fax: 303.539.8399
www.koalabear.com
®
P/N 432 December 2010
Hardware Supplied
Two Plastite Screws Two Modified Truss Head Wood Screws