Kontron CP3003-V - Manual (Page 29)

CP3003-SA Introduction
ID 1052-6929, Rev. 2.0 Page 1 - 9
D R A F T — F O R I N T E R N A L U S E O N L Y
1.5 Technical Specification
Table 1-1: CP3003-SA Main Specifications
FEATURES SPECIFICATIONS
Processor and Memory
CPU The CP3003-SA supports the following 3 rd generation microprocessors:
• Quad-core Intel® Core™ i7-3612QE (SV), 2.1 GHz, 6 MB L3 cache
• Dual-core Intel® Core™ i7-3555LE (LV), 2.5 GHz, 4 MB L3 cache
• Dual-core Intel® Core™ i7-3517UE (ULV), 1.7 GHz, 4 MB L3 cache
Further processor features used on the CP3003-SA:
• Up to four execution cores
• Intel® Hyper-Threading Technology (Intel® HT Technology)
• Intel® 64 Architecture
• Intel® Advanced Vector Extensions (AVX) floating point
• Intel® Turbo Boost Technology
• System memory interface with optimized support for dual-channel
DDR3 SDRAM memory at 1600 MHz with ECC
• Integrated 2D and 3D Graphics Engines
• DMI 2.0 with 5 GT/s and FDI interfaces to the Intel® QM77 Chipset
• One x8 PCI Express 2.0 port operating at 5 GT/s
Please contact Kontron for further information concerning the suitability of
other Intel processors for use with the CP3003-SA.
Memory Main Memory:
• Up to 16 GB, dual-channel DDR3 SDRAM memory with ECC running at
1600 MHz on two SODIMM sockets
Cache Structure:
• 64 kB L1 cache for each core
• 32 kB instruction cache
• 32 kB data cache
• 256 kB L2 shared instruction/data cache for each core
• Up to 6 MB L3 shared instruction/data cache shared between all cores
Flash Memory:
• Two SPI boot flash chips (2 x 8 MB) for two separate uEFI BIOS images
• Up to 32 GB SLC NAND flash via an onboard SATA Flash module (SSD)
Serial EEPROM with 64 kbit
Chi
ps
et
Intel® QM77 Mobile Intel® QM77 Express Chipset features used on the CP3003-SA:
• Four x1 PCI Express 2.0 ports operating at 5 GT/s
• SATA host controller with six ports and RAID 0/1/5/10 support
• Two SATA 6 Gb/s ports
• Four SATA 3 Gb/s ports
• Four USB 2.0 host interfaces and up to two USB 3.0 host interfaces
• Integrated Ethernet controller
• SPI flash interface support
• Low Pin Count (LPC) interface
• Power management logic support
• Enhanced DMA controller, interrupt controller, and timer functions
• System Management Bus (SMBus) compatible with most I²C™ devices
• DMI 2.0 with 5 GT/s and FDI interfaces to the processor
• Analog display port
• Two digital display ports
• High Definition Audio interface
• Integrated RTC