Kontron CP3003-V - Manual (Page 31)

CP3003-SA Introduction
ID 1052-6929, Rev. 2.0 Page 1 - 11
D R A F T — F O R I N T E R N A L U S E O N L Y
Interfaces
Gigabit Ethernet Three 10 Base-T/100 Base-TX/1000 Base-T Gigabit Ethernet interfaces based
on three Intel® 82574L Ethernet PCI Express bus controllers, two interfaces
individually switchable to front I/O or rear I/O, one interface available on the
CP3003-HDD module:
• Dual RJ-45 connector on the front panel
• Automatic mode recognition (Auto-Negotiation)
• Automatic cabling configuration recognition (Auto-MDI/X)
• Wake-on-LAN support available only on the two interfaces switch-
able to front I/O or rear I/O
USB Five USB ports:
• Two USB 2.0 ports on the front I/O
• Two USB 2.0 ports on the rear I/O interface
• One USB 3.0 port on the 120-pin onboard high-speed I/O extension con-
nector
Serial Two 16C550-compatible UARTs:
• COMA available on the 8 HP extension module or on rear I/O
• COMB or GPIO available on rear I/O only
SATA
• Six SATA ports, two onboard, two on rear I/O, and two on the 8 HP ex-
tension module
• Data transfer rates up to 600 MB/s
• High-performance RAID 0/1/5/10 functionality on all SATA ports
I/O Expansion
Interfaces I/O expansion to 8 HP board version via the CP3003-HDD module:
• SATA 6 Gb/s
• CFast (SATA 3 Gb/s)
• USB 3.0
• 2x DP (DisplayPort)
• COMA
• Reset button and HDD/SSD activity LED
• Gigabit Ethernet
I/O expansion to 12 HP board version via the CP3003-HDD module and the
2.5" SATA adapter module:
• 2x SATA (SATA 3 Gb/s and SATA 6 Gb/s)
• USB 3.0
• 2x DP (DisplayPort)
• COMA
• Reset button and HDD/SSD activity LED
• Gigabit Ethernet
I/O expansion to 8 HP board version via the CP3003-XMC module:
• PCI Express x8, x4 or x1
• CFast (SATA 3 Gb/s)
I/O expansion of CP3003-SA via the Smart Extension Module (exceeds 4 HP):
• SATA 3 Gb/s
• USB 2.0
Table 1-1: CP3003-SA Main Specifications (Continued)
FEATURES SPECIFICATIONS