3 hardware debug/test registers, Hardware debug/test registers - 8, Hardware debug register bit map - 8 – Kontron CP382 User Manual
Page 50: Hardware status register bit map - 8, Configuration cp382
Advertising
Configuration
CP382
Page 4 - 8
© 2002 PEP Modular Computers GmbH
ID 24208, Rev. 01
4.3.3
Hardware Debug/Test Registers
These registers are for internal test and debug only. The Common Status Register contains
Logic-Version and PCB -Version. The Common Debug Register is a read/write register without
any further functionality besides the front panel monitor and control LED’s.
Table 4-5:
Hardware Debug Register Bit Map
Bits
Type
Default
Function
31-2
r/w
0
Reserved
1
r/w
0
FAIL
0
r/w
0
RUN
Table 4-6:
Hardware Status Register Bit Map
Bits
Type
Default*
Function
31-16
r
0
Reserved
15-8
r
00
HW Version (PCB Index)
7-0
r
01
Logic Version
Note...
The HW version starts with 0, the Logic version starts with 1. At each further
release it will be incremented by 1.
Advertising