Kontron PB-SIO4 - Manual (Page 15)

PB-SIO4 Introduction
ID 19957, Rev. 0300 Page 1 - 5 ® PEP Modular Computers GmbH
1.4 PB-SIO4 External Interfacing
Connection of the PB-SIO4 piggyback to external devices is a function of the specific
carrier board for the piggyback. In conjunction with the carrier board there are various
possibilities for connecting the I/O channels of the piggyback to external devices.
For the carrier boards themselves there are three types of connectors available.
Front Panel:
• 50-pin male, double row, flat-ribbon cable connector head, locking
• 50-pin female, Dsub connector
On-Board:
• 50-pin male, double row, flat-ribbon cable connector head
In conjunction with the carrier board’s connectors, there is also the possbility of provid-
ing connection to external devices using the AD-SIO4 adapter. This adapter utilizes
either of the carrier board’s flat-ribbon connectors to provide 4, 15-pin female, Dsub con-
nectors. One connector for each channel of the PB-SIO4. Two PB-SIO4’s and two of
these adapters can be combined to provide 8 serial I/O channels. The AD-SIO4 is
optional and must be ordered separately. See chapter 4 of this manual for a description
of the AD-SIO4.
1.5 Carrier Board External Connectors
Figure 1-3: Carrier Board External Connector Types
1 2
49 50
50-Pin Male
Front Panel 50-Pin Female 50-Pin Male
1
1 2
49 50
50
34
17
Front Panel On Board