Kontron PB-SIO4 - Manual (Page 34)

PB-SIO4 Adapter AD-SIO4
ID 19957, Rev. 0300 Page 4 - 4 ® PEP Modular Computers GmbH
Figure 4-2: Rear View of the AD-SIO4
Connector BU5 is for use with the PB-SIO4. Connector BU6 is reserved for use with the
PB-SIO4A, another serial interface piggyback from PEP.
$ $ Note!
Always ensure that the correct connector of the adapter cable is
connected to BU5. See Table 3-4 for cable pinout.
$ $ Note!
For use with the PB-SIO4 ensure that there is no cable connected
to BU6. Failure to comply with this will result in misfunctioning and
possible damage to equipment.
RESERVED DO NOT USE
USE FOR PB-SIO4
(see note below)
BU6
BU5
1 2
24 23
1 2
24 23