Kontron PB-SIO4A - Manual (Page 22)

PB-SIO4A Installation
ID 19958, Rev. 0300 Page 2 - 4 ® PEP Modular Computers GmbH
• if required, repeat this process for a second piggyback on this carrier board
• install the carrier board and optional adapters as required
• connect external interfacing cables to the carrier board and optional adapters as
required
• ensure that the carrier board, optional adapters, and interfacing cables are properly
secured
2.2 Software Installation
2.2.1 Driver Installation
Drivers are available for various operating systems but are not delivered with the PB-
SIO4A. If required, please order the appropriate driver separately.
For installation of any required driver, please refer to the driver documentation itself.