Starting uefi bios setup, Cp6003-sa/ra/rc uefi bios starting uefi bios setup – Kontron CP6003-RC uEFI BIOS User Manual

Page 9

Advertising
background image

CP6003-SA/RA/RC uEFI BIOS

Starting uEFI BIOS Setup

ID 1045-9149, Rev. 2.0

Page 9

P R E L I M I N A R Y

1.

Starting uEFI BIOS Setup

The CP6003-SA/RA/RC is provided with a Kontron-customized, pre-installed and configured
version of Aptio® (referred to as uEFI BIOS in this manual), AMI’s next generation BIOS firm-
ware based on the Unified Extensible Firmware Interface (uEFI) specification and the Intel®
Platform Innovation Framework for EFI.

This uEFI BIOS provides a variety of new and enhanced functions specifically tailored to the
hardware features of the CP6003-SA/RA/RC. To take advantage of these functions, the uEFI
BIOS comes with an uEFI Shell, which provides quick and easy access to the individual func-
tion settings for control or modification of the uEFI BIOS configuration, and a Setup program,
which allows the accessing of various menus that provide functions or access to sub-menus
with more specific functions of their own. The individual menus and the configurable functions
are described in this guide.

To start the uEFI BIOS Setup program, follow the steps below:

1. Power on the board.
2. Wait until the first characters appear on the screen (POST messages or splash screen).
3. Press the <F2> key.
4. If the uEFI BIOS is password-protected, a window such as the one below will appear:

Enter either the User password or the Administrator password (refer to Chapter 4,
Security Setup, for further information), press <RETURN>, and proceed with step 2.

5. A Setup menu with the following token attributes will appear.

The currently active menu and the currently active uEFI BIOS Setup item are highlighted
in white.

E n t e r P a s s w o r d

Advertising
This manual is related to the following products: