2 board-specific information, Board-specific information - 4, Introduction cp6004-sa – Kontron CP6004-SA User Manual
Page 22
Introduction
CP6004-SA
Page 1 - 4
ID 1052-8529, Rev. 2.0
D R A F T — F O R I N T E R N A L U S E O N L Y
1.2
Board-Specific Information
The CP6004-SA is a CompactPCI single-board computer based on the 3
rd
generation Intel®
Core™ i7 and i5 processors and specifically designed for use in highly integrated platforms with
solid mechanical interfacing for a wide range of industrial environment applications.
Some of the CP6004-SA's outstanding features are:
•
Support for the following 3
rd
generation processors:
•
Intel® Core™ i7-3615QE (SV) quad-core processor, 2.3 GHz, 6 MB L3 cache
•
Intel® Core™ i7-3612QE (SV) quad-core processor, 2.1 GHz, 6 MB L3 cache
•
Intel® Core™ i7-3555LE (LV) dual-core processor, 2.5 GHz, 4 MB L3 cache
•
Intel® Core™ i5-3610ME (SV) dual-core processor, 2.7 GHz, 3 MB L3 cache
•
Intel® QM77 Express Chipset
•
Up to 16 GB, dual-channel, DDR3 SDRAM memory with ECC running at 1600 MHz on two
SODIMM sockets
•
Integrated 3D high-performance graphics controller with three high-resolution graphics in-
terfaces (VGA, 2 x HDMI/DVI)
•
64-bit/66 MHz PCI or PCI-X CompactPCI interface (PICMG 2.0)
•
One PMC slot with PCI functionality and with rear I/O support; 64-bit/66 MHz PCI inter-
face or 64-bit/133 MHz PCI-X interface
•
One XMC slot utilizing a x8 lane PCI Express 2.0 interconnection
•
Five Gigabit Ethernet interfaces:
•
Three Gigabit Ethernet interfaces on front I/O
•
Two Gigabit Ethernet interfaces on rear I/O (PICMG 2.16)
•
Two Gigabit Ethernet (GbE) controllers:
•
One Intel® 82579LM Gigabit Ethernet controller connected to one GbE port on the
front panel
•
One Intel® I350 quad-port Gigabit Ethernet controller connected to two GbE ports on
the front panel and two GbE ports on the rear I/O
•
Six SATA interfaces with SATA RAID 0/1/5/10 support:
•
One onboard SATA 6 Gb/s interface for the standard SATA onboard connector
•
One onboard SATA 6 Gb/s interface for either one SATA Flash module or one SATA
2.5" HDD/SSD
•
Four SATA 3 Gb/s interfaces on the rear I/O
•
Six USB ports:
•
Two USB 2.0 ports on the front panel
•
Four USB 2.0 ports on the rear I/O
•
Two COM ports:
•
One RS-232 COM port either on the front panel or on the rear I/O (COMA)
•
One RS-232 COM port on the rear I/O (COMB)
•
TCG 1.2 compliant Trusted Platform Module (TPM), on request
•
Two SPI boot flashes for two separate uEFI BIOS images:
•
One standard SPI boot flash
•
One recovery SPI boot flash
•
Watchdog timer
•
Battery-backed real-time clock (RTC)
•
Three onboard DIP switches for board configuration
•
Supports PICMG Packet Switching Backplane Specification 2.16
•
IPMI support
•
4HP, 6U CompactPCI
•
Passive heat sink solution for forced-airflow cooling