Document Outline

• Revision History
• Imprint
• Disclaimer
• Table of Contents
• About This Book
• Why the Document was Created
• How to Use This Document
• Proprietary Note
• Trademarks
• Environmental Protection Statement
• Explanation of Symbols
• For Your Safety
  • High Voltage Safety Instructions
  • Special Handling and Unpacking Instructions
  • General Instructions on Usage
• Two Year Warranty
• 1. Using the Command-Line Interface
  • 1.1 Command Syntax
  • 1.2 Command Conventions
    • 1.2.1 Common Parameter Values
  • 1.3 Slot/Port Naming Convention
  • 1.4 Using the “No” Form of a Command
  • 1.5 Command Modes
    • 1.5.1 Command Completion and Abbreviation
    • 1.5.2 CLI Error Messages
    • 1.5.3 CLI Line-Editing Conventions
  • 1.6 Using CLI Help
  • 1.7 Accessing the CLI
• 2. Switching Commands
  • 2.1 Port Configuration Commands
    • 2.1.1 interface
    • 2.1.2 auto-negotiate
    • 2.1.3 auto-negotiate all
    • 2.1.4 description
    • 2.1.5 mtu
    • 2.1.6 shutdown
    • 2.1.7 shutdown all
    • 2.1.8 speed
    • 2.1.9 speed all
    • 2.1.10 show port
    • 2.1.11 show port protocol
  • 2.2 Spanning Tree Protocol (STP) Commands
    • 2.2.1 spanning-tree
    • 2.2.2 spanning-tree bpdumigrationcheck
    • 2.2.3 spanning-tree configuration name
    • 2.2.4 spanning-tree configuration revision
    • 2.2.5 spanning-tree edgeport
    • 2.2.6 spanning-tree forceversion
    • 2.2.7 spanning-tree forward-time
    • 2.2.8 spanning-tree hello-time
    • 2.2.9 spanning-tree max-age
    • 2.2.10 spanning-tree max-hops
    • 2.2.11 spanning-tree mst
    • 2.2.12 spanning-tree mst instance
    • 2.2.13 spanning-tree mst priority
    • 2.2.14 spanning-tree mst vlan
    • 2.2.15 spanning-tree port mode
    • 2.2.16 spanning-tree port mode all
    • 2.2.17 show spanning-tree
    • 2.2.18 show spanning-tree brief
    • 2.2.19 show spanning-tree interface
    • 2.2.20 show spanning-tree mst port detailed
    • 2.2.21 show spanning-tree mst port summary
    • 2.2.22 show spanning-tree mst summary
    • 2.2.23 show spanning-tree summary
    • 2.2.24 show spanning-tree vlan
  • 2.3 VLAN Commands
    • 2.3.1 vlan database
    • 2.3.2 network mgmt_vlan
    • 2.3.3 vlan
    • 2.3.4 vlan acceptframe
    • 2.3.5 vlan ingressfilter
    • 2.3.6 vlan makestatic
    • 2.3.7 vlan name
    • 2.3.8 vlan participation
    • 2.3.9 vlan participation all
    • 2.3.10 vlan port acceptframe all
    • 2.3.11 vlan port ingressfilter all
    • 2.3.12 vlan port pvid all
    • 2.3.13 vlan port tagging all
    • 2.3.14 vlan protocol group
    • 2.3.15 vlan protocol group add protocol
    • 2.3.16 vlan protocol group remove
    • 2.3.17 protocol group
    • 2.3.18 protocol vlan group
    • 2.3.19 protocol vlan group all
    • 2.3.20 vlan pvid
    • 2.3.21 vlan tagging
    • 2.3.22 vlan association subnet
    • 2.3.23 vlan association mac
    • 2.3.24 show vlan
    • 2.3.25 show vlan brief
    • 2.3.26 show vlan port
    • 2.3.27 show vlan association subnet
    • 2.3.28 show vlan association mac
  • 2.4 Double VLAN Commands
    • 2.4.1 dvlan-tunnel ethertype
    • 2.4.2 mode dot1q-tunnel
    • 2.4.3 mode dvlan-tunnel
    • 2.4.4 show dot1q-tunnel
    • 2.4.5 show dvlan-tunnel
  • 2.5 Provisioning (IEEE 802.1p) Commands
    • 2.5.1 vlan port priority all
    • 2.5.2 vlan priority
  • 2.6 Protected Ports Commands
    • 2.6.1 switchport protected (Global Config)
    • 2.6.2 switchport protected (Interface Config)
    • 2.6.3 show switchport protected
    • 2.6.4 show interfaces switchport
  • 2.7 GARP Commands
    • 2.7.1 set garp timer join
    • 2.7.2 set garp timer leave
    • 2.7.3 set garp timer leaveall
    • 2.7.4 show garp
  • 2.8 GVRP Commands
    • 2.8.1 set gvrp adminmode
    • 2.8.2 set gvrp interfacemode
    • 2.8.3 show gvrp configuration
  • 2.9 GMRP Commands
    • 2.9.1 set gmrp adminmode
    • 2.9.2 set gmrp interfacemode
    • 2.9.3 show gmrp configuration
    • 2.9.4 show mac-address-table gmrp
  • 2.10 Port-Based Network Access Control Commands
    • 2.10.1 authentication login
    • 2.10.2 clear dot1x statistics
    • 2.10.3 clear radius statistics
    • 2.10.4 dot1x defaultlogin
    • 2.10.5 dot1x initialize
    • 2.10.6 dot1x login
    • 2.10.7 dot1x max-req
    • 2.10.8 dot1x port-control
    • 2.10.9 dot1x port-control all
    • 2.10.10 dot1x re-authenticate
    • 2.10.11 dot1x re-authentication
    • 2.10.12 dot1x system-auth-control
    • 2.10.13 dot1x timeout
    • 2.10.14 dot1x user
    • 2.10.15 users defaultlogin
    • 2.10.16 users login
    • 2.10.17 show authentication
    • 2.10.18 show authentication users
    • 2.10.19 show dot1x
    • 2.10.20 show dot1x users
    • 2.10.21 show users authentication
  • 2.11 Storm-Control Commands
    • 2.11.1 storm-control broadcast
    • 2.11.2 storm-control broadcast level
    • 2.11.3 storm-control broadcast all
    • 2.11.4 storm-control broadcast all level
    • 2.11.5 storm-control multicast
    • 2.11.6 storm-control multicast level
    • 2.11.7 storm-control multicast all
    • 2.11.8 storm-control multicast all level
    • 2.11.9 storm-control unicast
    • 2.11.10 storm-control unicast level
    • 2.11.11 storm-control unicast all
    • 2.11.12 storm-control unicast all level
    • 2.11.13 storm-control flowcontrol
    • 2.11.14 show storm-control
  • 2.12 Port-Channel/LAG (802.3ad) Commands
    • 2.12.1 port-channel
    • 2.12.2 addport
    • 2.12.3 deleteport (Interface Config)
    • 2.12.4 deleteport (Global Config)
    • 2.12.5 port-channel static
    • 2.12.6 port lacpmode
    • 2.12.7 port lacpmode all
    • 2.12.8 port-channel adminmode
    • 2.12.9 port-channel linktrap
    • 2.12.10 port-channel name
    • 2.12.11 show port-channel brief
    • 2.12.12 show port-channel
  • 2.13 Port Mirroring
    • 2.13.1 monitor session
    • 2.13.2 no monitor
    • 2.13.3 show monitor session
  • 2.14 Static MAC Filtering
    • 2.14.1 macfilter
    • 2.14.2 macfilter addsrc
    • 2.14.3 macfilter addsrc all
    • 2.14.4 show mac-address-table static
    • 2.14.5 show mac-address-table staticfiltering
  • 2.15 IGMP Snooping Configuration Commands
    • 2.15.1 set igmp
    • 2.15.2 set igmp interfacemode
    • 2.15.3 set igmp fast-leave
    • 2.15.4 set igmp groupmembership-interval
    • 2.15.5 set igmp maxresponse
    • 2.15.6 set igmp mcrtexpiretime
    • 2.15.7 set igmp mrouter
    • 2.15.8 set igmp mrouter interface
    • 2.15.9 show igmpsnooping
    • 2.15.10 show igmpsnooping mrouter interface
    • 2.15.11 show igmpsnooping mrouter vlan
    • 2.15.12 show mac-address-table igmpsnooping
  • 2.16 Port Security Commands
    • 2.16.1 port-security
    • 2.16.2 port-security max-dynamic
    • 2.16.3 port-security max-static
    • 2.16.4 port-security mac-address
    • 2.16.5 port-security mac-address move
    • 2.16.6 show port-security
    • 2.16.7 show port-security dynamic
    • 2.16.8 show port-security static
    • 2.16.9 show port-security violation
  • 2.17 LLDP (802.1AB) Commands
    • 2.17.1 lldp transmit
    • 2.17.2 lldp receive
    • 2.17.3 lldp timers
    • 2.17.4 lldp transmit-tlv
    • 2.17.5 lldp transmit-mgmt
    • 2.17.6 lldp notification
    • 2.17.7 lldp notification-interval
    • 2.17.8 clear lldp statistics
    • 2.17.9 clear lldp remote-data
    • 2.17.10 show lldp
    • 2.17.11 show lldp interface
    • 2.17.12 show lldp statistics
    • 2.17.13 show lldp remote-device
    • 2.17.14 show lldp remote-device detail
    • 2.17.15 show lldp local-device
    • 2.17.16 show lldp local-device detail
  • 2.18 Denial of Service Commands
    • 2.18.1 dos-control sipdip
    • 2.18.2 dos-control firstfrag
    • 2.18.3 dos-control tcpfrag
    • 2.18.4 dos-control tcpflag
    • 2.18.5 dos-control l4port
    • 2.18.6 dos-control icmp
    • 2.18.7 show dos-control
  • 2.19 MAC Database Commands
    • 2.19.1 bridge aging-time
    • 2.19.2 show forwardingdb agetime
    • 2.19.3 show mac-address-table multicast
    • 2.19.4 show mac-address-table stats
• 3. Routing Commands
  • 3.1 Address Resolution Protocol (ARP) Commands
    • 3.1.1 arp
    • 3.1.2 ip proxy-arp
    • 3.1.3 arp cachesize
    • 3.1.4 arp dynamicrenew
    • 3.1.5 arp purge
    • 3.1.6 arp resptime
    • 3.1.7 arp retries
    • 3.1.8 arp timeout
    • 3.1.9 clear arp-cache
    • 3.1.10 show arp
    • 3.1.11 show arp brief
    • 3.1.12 show arp switch
  • 3.2 IP Routing Commands
    • 3.2.1 routing
    • 3.2.2 ip routing
    • 3.2.3 ip address
    • 3.2.4 ip route
    • 3.2.5 ip route default
    • 3.2.6 ip route distance
    • 3.2.7 ip forwarding
    • 3.2.8 ip netdirbcast
    • 3.2.9 ip mtu
    • 3.2.10 encapsulation
    • 3.2.11 show ip brief
    • 3.2.12 show ip interface
    • 3.2.13 show ip interface brief
    • 3.2.14 show ip route
    • 3.2.15 show ip route summary
    • 3.2.16 show ip route preferences
    • 3.2.17 show ip stats
  • 3.3 Router Discovery Protocol Commands
    • 3.3.1 ip irdp
    • 3.3.2 ip irdp address
    • 3.3.3 ip irdp holdtime
    • 3.3.4 ip irdp maxadvertinterval
    • 3.3.5 ip irdp minadvertinterval
    • 3.3.6 ip irdp preference
    • 3.3.7 show ip irdp
  • 3.4 Virtual LAN Routing Commands
    • 3.4.1 vlan routing
    • 3.4.2 show ip vlan
  • 3.5 Virtual Router Redundancy Protocol Commands
    • 3.5.1 ip vrrp (Global Config)
    • 3.5.2 ip vrrp (Interface Config)
    • 3.5.3 ip vrrp mode
    • 3.5.4 ip vrrp ip
    • 3.5.5 ip vrrp authentication
    • 3.5.6 ip vrrp preempt
    • 3.5.7 ip vrrp priority
    • 3.5.8 ip vrrp timers advertise
    • 3.5.9 show ip vrrp interface stats
    • 3.5.10 show ip vrrp
    • 3.5.11 show ip vrrp interface
    • 3.5.12 show ip vrrp interface brief
  • 3.6 DHCP and BOOTP Relay Commands
    • 3.6.1 bootpdhcprelay cidoptmode
    • 3.6.2 bootpdhcprelay enable
    • 3.6.3 bootpdhcprelay maxhopcount
    • 3.6.4 bootpdhcprelay minwaittime
    • 3.6.5 bootpdhcprelay serverip
    • 3.6.6 show bootpdhcprelay
  • 3.7 Open Shortest Path First (OSPF) Commands
    • 3.7.1 router ospf
    • 3.7.2 enable (OSPF)
    • 3.7.3 ip ospf
    • 3.7.4 1583compatibility
    • 3.7.5 area default-cost (OSPF)
    • 3.7.6 area nssa (OSPF)
    • 3.7.7 area nssa default-info-originate (OSPF)
    • 3.7.8 area nssa no-redistribute (OSPF)
    • 3.7.9 area nssa no-summary (OSPF)
    • 3.7.10 area nssa translator-role (OSPF)
    • 3.7.11 area nssa translator-stab-intv (OSPF)
    • 3.7.12 area range (OSPF)
    • 3.7.13 area stub (OSPF)
    • 3.7.14 area stub no-summary (OSPF)
    • 3.7.15 area virtual-link (OSPF)
    • 3.7.16 area virtual-link authentication
    • 3.7.17 area virtual-link dead-interval (OSPF)
    • 3.7.18 area virtual-link hello-interval (OSPF)
    • 3.7.19 area virtual-link retransmit-interval (OSPF)
    • 3.7.20 area virtual-link transmit-delay (OSPF)
    • 3.7.21 default-information originate (OSPF)
    • 3.7.22 default-metric (OSPF)
    • 3.7.23 distance ospf (OSPF)
    • 3.7.24 distribute-list out (OSPF)
    • 3.7.25 exit-overflow-interval (OSPF)
    • 3.7.26 external-lsdb-limit (OSPF)
    • 3.7.27 ip ospf areaid
    • 3.7.28 ip ospf authentication
    • 3.7.29 ip ospf cost
    • 3.7.30 ip ospf dead-interval
    • 3.7.31 ip ospf hello-interval
    • 3.7.32 ip ospf priority
    • 3.7.33 ip ospf retransmit-interval
    • 3.7.34 ip ospf transmit-delay
    • 3.7.35 ip ospf mtu-ignore
    • 3.7.36 router-id (OSPF)
    • 3.7.37 redistribute (OSPF)
    • 3.7.38 maximum-paths (OSPF)
    • 3.7.39 timers spf
    • 3.7.40 trapflags (OSPF)
    • 3.7.41 show ip ospf
    • 3.7.42 show ip ospf abr
    • 3.7.43 show ip ospf area
    • 3.7.44 show ip ospf database
    • 3.7.45 show ip ospf database database-summary
    • 3.7.46 show ip ospf interface
    • 3.7.47 show ip ospf interface brief
    • 3.7.48 show ip ospf interface stats
    • 3.7.49 show ip ospf neighbor
    • 3.7.50 show ip ospf range
    • 3.7.51 show ip ospf statistics
    • 3.7.52 show ip ospf stub table
    • 3.7.53 show ip ospf virtual-link
    • 3.7.54 show ip ospf virtual-link brief
  • 3.8 Routing Information Protocol (RIP) Commands
    • 3.8.1 router rip
    • 3.8.2 enable (RIP)
    • 3.8.3 ip rip
    • 3.8.4 auto-summary
    • 3.8.5 default-information originate (RIP)
    • 3.8.6 default-metric (RIP)
    • 3.8.7 distance rip
    • 3.8.8 distribute-list out (RIP)
    • 3.8.9 ip rip authentication
    • 3.8.10 ip rip receive version
    • 3.8.11 ip rip send version
    • 3.8.12 hostroutesaccept
    • 3.8.13 split-horizon
    • 3.8.14 redistribute (RIP)
    • 3.8.15 show ip rip
    • 3.8.16 show ip rip interface brief
    • 3.8.17 show ip rip interface
• 4. Quality of Service (QoS) Commands
  • 4.1 Class of Service (CoS) Commands
    • 4.1.1 classofservice dot1p-mapping
    • 4.1.2 classofservice ip-dscp-mapping
    • 4.1.3 classofservice trust
    • 4.1.4 cos-queue min-bandwidth
    • 4.1.5 cos-queue strict
    • 4.1.6 traffic-shape
    • 4.1.7 show classofservice dot1p-mapping
    • 4.1.8 show classofservice ip-precedence-mapping
    • 4.1.9 show classofservice ip-dscp-mapping
    • 4.1.10 show classofservice trust
    • 4.1.11 show interfaces cos-queue
  • 4.2 Differentiated Services (DiffServ) Commands
    • 4.2.1 diffserv
  • 4.3 DiffServ Class Commands
    • 4.3.1 class-map
    • 4.3.2 class-map rename
    • 4.3.3 match ethertype
    • 4.3.4 match any
    • 4.3.5 match class-map
    • 4.3.6 match cos
    • 4.3.7 match secondary-cos
    • 4.3.8 match destination-address mac
    • 4.3.9 match dstip
    • 4.3.10 match dstl4port
    • 4.3.11 match ip dscp
    • 4.3.12 match ip precedence
    • 4.3.13 match ip tos
    • 4.3.14 match protocol
    • 4.3.15 match source-address mac
    • 4.3.16 match srcip
    • 4.3.17 match srcl4port
    • 4.3.18 match vlan
    • 4.3.19 match secondary-vlan
  • 4.4 DiffServ Policy Commands
    • 4.4.1 assign-queue
    • 4.4.2 drop
    • 4.4.3 mirror
    • 4.4.4 redirect
    • 4.4.5 conform-color
    • 4.4.6 class
    • 4.4.7 mark cos
    • 4.4.8 mark ip-dscp
    • 4.4.9 mark ip-precedence
    • 4.4.10 police-simple
    • 4.4.11 policy-map
    • 4.4.12 policy-map rename
  • 4.5 DiffServ Service Commands
    • 4.5.1 service-policy
  • 4.6 DiffServ Show Commands
    • 4.6.1 show class-map
    • 4.6.2 show diffserv
    • 4.6.3 show policy-map
    • 4.6.4 show diffserv service
    • 4.6.5 show diffserv service brief
    • 4.6.6 show policy-map interface
    • 4.6.7 show service-policy
  • 4.7 MAC Access Control List (ACL) Commands
    • 4.7.1 mac access-list extended
    • 4.7.2 mac access-list extended rename
    • 4.7.3 {deny | permit}
    • 4.7.4 mac access-group
    • 4.7.5 show mac access-lists
  • 4.8 IP Access Control List (ACL) Commands
    • 4.8.1 access-list
    • 4.8.2 ip access-group
    • 4.8.3 acl-trapflags
    • 4.8.4 show ip access-lists
    • 4.8.5 show access-lists
  • 4.9 ACL trap commands
    • 4.9.1 acl-traptimer
    • 4.9.2 show acl-traptimer
• 5. Utility Commands
  • 5.1 Commands for update and startup Configuration
    • 5.1.1 download ipmifw
    • 5.1.2 download initrd
    • 5.1.3 download frudata
    • 5.1.4 download fwum
    • 5.1.5 download bootloader
    • 5.1.6 download amcipmifw
    • 5.1.7 startupslot
    • 5.1.8 startupslot activate
    • 5.1.9 show startupconfig
  • 5.2 ATCA commands
    • 5.2.1 set board sensor threshold
    • 5.2.2 set board ipmi-controller debug
    • 5.2.3 set board fcap
    • 5.2.4 show boardinfo fcap
    • 5.2.5 set board routing
    • 5.2.6 show boardinfo routing
    • 5.2.7 ekeying
    • 5.2.8 show atca ekeying
  • 5.3 System Information and Statistics Commands
    • 5.3.1 show arp switch
    • 5.3.2 show eventlog
    • 5.3.3 show hardware
    • 5.3.4 show version
    • 5.3.5 show interface
    • 5.3.6 show interface ethernet
    • 5.3.7 show mac-addr-table
    • 5.3.8 show running-config
    • 5.3.9 show sysinfo
    • 5.3.10 show tech-support
    • 5.3.11 show boardinfo post-status
    • 5.3.12 show boardinfo sensors
    • 5.3.13 show boardinfo event-log
    • 5.3.14 show boardinfo update-status
    • 5.3.15 show boardinfo version
    • 5.3.16 show boardinfo address
    • 5.3.17 show boardinfo fru
    • 5.3.18 show boardinfo ipmidev
    • 5.3.19 show boardinfo led
    • 5.3.20 show boardinfo amc connection
    • 5.3.21 show boardinfo amc fru
    • 5.3.22 show boardinfo amc ipmidev
    • 5.3.23 show boardinfo xfp
    • 5.3.24 show boardinfo cpu-load
    • 5.3.25 show boardinfo memory-usage
  • 5.4 Logging Commands
    • 5.4.1 logging buffered
    • 5.4.2 logging buffered wrap
    • 5.4.3 logging cli-command
    • 5.4.4 logging console
    • 5.4.5 logging host
    • 5.4.6 logging host remove
    • 5.4.7 logging port
    • 5.4.8 logging syslog
    • 5.4.9 show logging
    • 5.4.10 show logging buffered
    • 5.4.11 show logging hosts
    • 5.4.12 show logging traplogs
    • 5.4.13 show logging backtrace
  • 5.5 System Utility and Clear Commands
    • 5.5.1 traceroute
    • 5.5.2 clear config
    • 5.5.3 clear counters
    • 5.5.4 clear igmpsnooping
    • 5.5.5 clear pass
    • 5.5.6 clear port-channel
    • 5.5.7 clear traplog
    • 5.5.8 clear vlan
    • 5.5.9 clear board event-log
    • 5.5.10 enable passwd
    • 5.5.11 logout
    • 5.5.12 set bootstopkey
    • 5.5.13 ping
    • 5.5.14 quit
    • 5.5.15 reload
    • 5.5.16 copy
  • 5.6 Keying for Advanced Features
    • 5.6.1 license advanced
    • 5.6.2 show key-features
  • 5.7 Simple Network Time Protocol (SNTP) Commands
    • 5.7.1 sntp broadcast client poll-interval
    • 5.7.2 sntp client mode
    • 5.7.3 sntp client port
    • 5.7.4 sntp unicast client poll-interval
    • 5.7.5 sntp unicast client poll-timeout
    • 5.7.6 sntp unicast client poll-retry
    • 5.7.7 sntp multicast client poll-interval
    • 5.7.8 sntp server
    • 5.7.9 show sntp
    • 5.7.10 show sntp client
    • 5.7.11 show sntp server
  • 5.8 DHCP Server Commands
    • 5.8.1 ip dhcp pool
    • 5.8.2 client-identifier
    • 5.8.3 client-name
    • 5.8.4 default-router
    • 5.8.5 dns-server
    • 5.8.6 hardware-address
    • 5.8.7 host
    • 5.8.8 lease
    • 5.8.9 network (DHCP Pool Config)
    • 5.8.10 bootfile
    • 5.8.11 domain-name
    • 5.8.12 netbios-name-server
    • 5.8.13 netbios-node-type
    • 5.8.14 next-server
    • 5.8.15 option
    • 5.8.16 ip dhcp excluded-address
    • 5.8.17 ip dhcp ping packets
    • 5.8.18 service dhcp
    • 5.8.19 ip dhcp bootp automatic
    • 5.8.20 ip dhcp conflict logging
    • 5.8.21 clear ip dhcp binding
    • 5.8.22 clear ip dhcp server statistics
    • 5.8.23 clear ip dhcp conflict
    • 5.8.24 show ip dhcp binding
    • 5.8.25 show ip dhcp global configuration
    • 5.8.26 show ip dhcp pool configuration
    • 5.8.27 show ip dhcp server statistics
    • 5.8.28 show ip dhcp conflict
  • 5.9 DHCP Filtering
    • 5.9.1 ip dhcp filtering
    • 5.9.2 ip dhcp filtering trust
    • 5.9.3 show ip dhcp filtering
  • 5.10 Enhanced Port-Channel / LAG and Multicast Commands
    • 5.10.1 port-channel hash multicast
    • 5.10.2 show port-channel hash multicast
    • 5.10.3 port-channel hash unicast
    • 5.10.4 show port-channel hash unicast
    • 5.10.5 multicast (interface)
    • 5.10.6 show port multicast
    • 5.10.7 multicast (VLAN)
    • 5.10.8 show vlan multicast
  • 5.11 Serviceability Packet Tracing Commands
    • 5.11.1 debug console
    • 5.11.2 debug clear
    • 5.11.3 debug spanning-tree bpdu transmit
    • 5.11.4 debug spanning-tree bpdu receive
    • 5.11.5 debug spanning-tree bpdu
    • 5.11.6 debug igmpsnooping packet transmit
    • 5.11.7 debug igmpsnooping packet receive
    • 5.11.8 debug igmpsnooping packet
    • 5.11.9 debug ping packet
    • 5.11.10 debug rip packet
    • 5.11.11 debug ospf packet
    • 5.11.12 debug lacp packet
• 6. Management Commands
  • 6.1 Network Interface Commands
    • 6.1.1 enable (Privileged EXEC access)
    • 6.1.2 serviceport ip
    • 6.1.3 serviceport protocol
    • 6.1.4 network parms
    • 6.1.5 network protocol
    • 6.1.6 network mac-address
    • 6.1.7 network mac-type
    • 6.1.8 network bind (extension fabric only)
    • 6.1.9 show network
    • 6.1.10 show serviceport
  • 6.2 Console Port Access Commands
    • 6.2.1 configuration
    • 6.2.2 lineconfig
    • 6.2.3 serial baudrate
    • 6.2.4 serial timeout
    • 6.2.5 show serial
  • 6.3 Telnet Commands
    • 6.3.1 ip telnet server enable
    • 6.3.2 telnet
    • 6.3.3 transport input telnet
    • 6.3.4 transport output telnet
    • 6.3.5 session-limit
    • 6.3.6 session-timeout
    • 6.3.7 telnetcon maxsessions
    • 6.3.8 telnetcon timeout
    • 6.3.9 disconnect
    • 6.3.10 show loginsession
    • 6.3.11 show telnet
    • 6.3.12 show telnetcon
  • 6.4 Secure Shell (SSH) Command
    • 6.4.1 ip ssh
    • 6.4.2 ip ssh protocol
    • 6.4.3 ip ssh server enable
    • 6.4.4 sshcon maxsessions
    • 6.4.5 sshcon timeout
    • 6.4.6 show ip ssh
  • 6.5 User Account Commands
    • 6.5.1 users name
    • 6.5.2 users passwd
    • 6.5.3 users snmpv3 accessmode
    • 6.5.4 users snmpv3 authentication
    • 6.5.5 users snmpv3 encryption
    • 6.5.6 show users
  • 6.6 SNMP Commands
    • 6.6.1 snmp-server
    • 6.6.2 snmp-server community
    • 6.6.3 snmp-server community ipaddr
    • 6.6.4 snmp-server community ipmask
    • 6.6.5 snmp-server community mode
    • 6.6.6 snmp-server community ro
    • 6.6.7 snmp-server community rw
    • 6.6.8 snmp-server enable traps violation
    • 6.6.9 snmp-server enable traps
    • 6.6.10 snmp-server enable traps bcaststorm
    • 6.6.11 snmp-server enable traps linkmode
    • 6.6.12 snmp-server enable traps multiusers
    • 6.6.13 snmp-server enable traps stpmode
    • 6.6.14 snmptrap
    • 6.6.15 snmptrap snmpversion
    • 6.6.16 snmptrap ipaddr
    • 6.6.17 snmptrap mode
    • 6.6.18 snmp trap link-status
    • 6.6.19 snmp trap link-status all
    • 6.6.20 show snmpcommunity
    • 6.6.21 show snmptrap
    • 6.6.22 show trapflags
  • 6.7 CLI Command Logging Command
    • 6.7.1 logging cli-command
  • 6.8 RADIUS Commands
    • 6.8.1 radius accounting mode
    • 6.8.2 radius server host
    • 6.8.3 radius server key
    • 6.8.4 radius server msgauth
    • 6.8.5 radius server primary
    • 6.8.6 radius server retransmit
    • 6.8.7 radius server timeout
    • 6.8.8 show radius
    • 6.8.9 show radius accounting
    • 6.8.10 show radius statistics
  • 6.9 TACACS+ Commands
    • 6.9.1 tacacs-server host
    • 6.9.2 tacacs-server key
    • 6.9.3 tacacs-server timeout
    • 6.9.4 key
    • 6.9.5 port
    • 6.9.6 priority
    • 6.9.7 timeout
    • 6.9.8 show tacacs
  • 6.10 Configuration Scripting Commands
    • 6.10.1 script apply
    • 6.10.2 script apply nointerl.scr
    • 6.10.3 script delete
    • 6.10.4 script list
    • 6.10.5 script show
    • 6.10.6 script validate
  • 6.11 Pre-login Banner and System Prompt Commands
    • 6.11.1 copy (pre-login banner)
    • 6.11.2 set prompt
  • 6.12 Bootcycle commands
    • 6.12.1 show boardinfo bootcycle
    • 6.12.2 set board bootcycle
  • 6.13 Watchdog support
    • 6.13.1 set watchdog
    • 6.13.2 show watchdog
• A. Getting Help
• B. List of Commands