Kontron KTUS15-mITX - 1.1 Basic User Manual
Ktus15/mitx users guide, If it’s embedded, it’s kontron
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- 1 Introduction
- 2 Installation procedure
- 3 System specification
- 4 Connector Definitions
- 4.1 Connector layout
- 4.2 Power Connector (PWR)
- 4.3 Power Out Connector (PWR-OUT)
- 4.4 Keyboard and Mouse connectors
- 4.5 Display connector
- 4.6 PCI-Express connectors
- 4.7 Serial ATA Hard Disk interface
- 4.8 Parallel ATA Hard Disk interface
- 4.9 Printer Port Connector (PRINTER)
- 4.10 Serial Ports
- 4.11 Ethernet Connectors
- 4.12 USB Connectors (USB)
- 4.13 Audio Connectors
- 4.14 Fan Connector (FAN_CPU)
- 4.15 Boot ROM Selection Jumper (BOOT ROM)
- 4.16 Clear CMOS Jumper (Clr-CMOS)
- 4.17 TPM Connector (TPM)
- 4.18 Front Panel Connector (FRONTPNL)
- 4.19 Feature Connector (FEATURE)
- 4.20 PCI Slot Connector (PCI Slot)
- 5 Onboard connectors and Mating connectors
- 6 System Resources
- Overview of BIOS Features
- 7 BIOS Configuration/Setup
- 7.1 Introduction
- 7.2 Main Menu
- 7.3 Advanced Menu
- 7.3.1 Advanced settings – CPU Configuration
- 7.3.2 Advanced settings – IDE Configuration
- 7.3.3 Advanced settings – LAN Configuration
- 7.3.4 Advanced settings – Configure Win627DHG Super IO Chipset
- 7.3.5 Advanced settings – Hardware Health Configuration
- 7.3.6 Advanced settings – Voltage Monitor
- 7.3.7 Advanced settings – ACPI Settings
- 7.3.8 Advanced settings – PCI Express Configuration
- 7.3.9 Advanced settings – Smbios Configuration
- 7.3.10 Advanced settings – Remote Access Configuration
- 7.3.11 Advanced settings – Trusted Support
- 7.3.12 Advanced settings – USB Configuration
- 7.3.13 Advanced settings – USB Mass Storage Device Configuration
- 7.3.14 Advanced settings – Spread Spectrum Clock
- 7.4 PCIPnP Menu
- 7.5 Boot Menu
- 7.6 Security Menu
- 7.7 Chipset Menu
- 7.8 Exit Menu
- 8 AMI BIOS Beep Codes
- 9 OS Setup
- 10 Warranty