Kontron AM4901 IPMI - Manual (Page 42)

IPMI Firmware User Guide AM5901/AM4901
Page 42 ID: 1035-8760, Rev. 3.0
6.1.1 Defaults
Each MCH has its own set of default values for Common Options. In the event that no MCH
hardware is recognized, the values for the AM4901 are used.
6.1.1.1 MCH type Not Recognized
In the event that no MCH hardware is recognized, the values for the MCH are as following:
locked = 0
suppressRedLEDForEventProcessingError = 0
tempCtrlDevice = 1
processPwrShutdownEvent = 1
phyDevice = 0
prioMode = 0
activConfigMode = 0
pwrMngMode = 0
supprAM4901ErrorBeforeBoardRevR12 = 0