Hard disk drives screen, 1st drive, 2nd drive, 3rd drive, etc – Kontron AM5010 BIOS User Manual

Page 74

Advertising
background image

Boot Setup

AM4010/AM4011/AM5010 BIOS

Page 64

ID 1022-2060, Rev. 2.0

HARD DISK DRIVES SCREEN

This screen will provide a list of hard disk drives if drives are installed in the system. If more
than one drive is installed, this screen also indicates the boot sequence of the drives. Further-
more, this screen provides functions for specifying the BIOS boot order of the drives when more
than one drive is installed.

1

st

Drive, 2

nd

Drive, 3

rd

Drive, etc.

The function 1

st

Drive is used to provide generic information about the currently selected drive

if a drive is installed. If more than one drive is installed, a list of the installed drives is provided,
which allows the selection of one of the listed drives as the 1

st

Drive.

The functions 2

nd

Drive, 3

rd

Drive, etc. are only available when the respective hard disk drives

are installed.

SETTING

DESCRIPTION

Not Installed

When displayed, indicates that there are no drives installed

<generic_drive_info>

When displayed, indicates the generic drive information of the 1

st

Drive

<generic_drive_info_1>

••

<generic_drive_info_n>

When displayed, indicates the drives installed and their current ordering for booting.

As required, use one of these settings to select a new 1

st

Drive.

Advertising
This manual is related to the following products: