Kontron AM5010 - Manual (Page 29)

AM5010 Introduction
ID 1022-1107, Rev. 4.0 Page 1 - 11
P R E L I M I N A R Y
Onboard
Contro
llers
Gigabit Ethernet Two Intel® 82571EB Dual Gigabit Ethernet PCI Express bus controllers:
• One controller connected to the Common Options Region
• One controller connected to Front I/O
VGA / DVI ATI ES1000 2D graphics controller for enhanced graphics performance:
• Supports resolutions of up to 1600 x 1200 pixels at a 75 Hz refresh rate
• Digital and analog output
• Dedicated 64 MB DDR2 memory
AMC Interconnection
Gigabit Ethernet Common Options Region ports 0-1
• Two Gigabit Ethernet SerDes ports
Serial ATA Common Options Region ports 2-3
• Two Serial ATA 150 ports
PCI Express Fat Pipes Region ports 4-7
• PCI Express interface, configured either as 1x4 or 4x1, operating as a root
complex controller only
Debug Interface Extended Options Region port 14
• One Debug port
Serial Interface Extended Options Region port 15
• One Serial port
Clock Input Clocks
• PCI express clock reference input (FCLKA)
Connecto
rs
Front Panel
Connectors • Two USB 2.0 ports on 4-pin connectors
• One Serial port (COM1) with RS232-signal level on RJ45 connector
• Two Gigabit Ethernet ports on RJ45 connectors
• One DVI -I interface, digital and analog signals
Onboard
Connectors • One SATA connector for optional 2.5” HDD/SSD
• One USB 2.0 connector for optional USB 2.0 NAND Flash
AMC Card-edge
Connector • One 170-pin AMC Card-edge connector
Switches
DIP Switches Three DIP switches for board configuration: one four-position switch, and two
two-position switches
Reset Switch One front panel hardware reset switch
Table 1-2: AM5010 Main Specifications (Continued)
FEATURES SPECIFICATIONS