Kontron AM5020 uEFI BIOS - Manual (Page 52)

The uEFI Shell AM5020 uEFI BIOS
Page 46 ID 1045-0247, Rev. 1.0
P R E L I M I N A R Y
6.2.8 kipmi uEFI Shell Command
kipmi
FUNCTION: Read or configure available MMC parameters
SYNTAX: kipmi [-?|-b|parameters]
where:
-? show online help
-b display output page by page
parameters fru -- display fru data: [Fru Device ID]
ipmb -- ipmb bus settings: ipmb [redundant / ssingle]
irq -- get / set KCS IRQ: irq [number]
mode -- set ipmi controller mode: mode [bmc / smc]
net -- display and change SOL network settings
sel -- handle system event log
sensor -- shows sensor related information
raw -- execute raw ipmi command
rawsendmessage -- execute raw SendMessage ipmi cmd
info -- show information about the device and firmware
DESCRIPTION: The kipmi command can read event logs or set the MMC IRQ
configuration. This shell application can also be used to set up raw
command to the MMC.
USAGE: Display fru data:
COMMAND / RESPONSE:
Shell> kipmi fru 0
Display ipmb bus settings:
COMMAND / RESPONSE:
Shell> kipmi ipmb
Change IRQ configuration:
COMMAND / RESPONSE:
Shell> kipmi irq 10
Show IRQ configuration:
COMMAND / RESPONSE:
Shell> kipmi irq