Kontron AM5020 uEFI BIOS - Manual (Page 54)

The uEFI Shell AM5020 uEFI BIOS
Page 48 ID 1045-0247, Rev. 1.0
P R E L I M I N A R Y
SETTINGS: mode <mode>: Display/Set the IPMI controller (MMC) operating mode
Options:
bmc:
IPMI controller (MMC) operates in BMC mode (master)
smc: IPMI controller (MMC) operates in SMC mode (slave)
Note: The BMC mode is not available on the AM5020. Please leave this
function at SMC mode.
net: Set IPMI-over-LAN (IOL) / Serial-over-LAN (SOL) parameters
sel: Display system event log
Note: The AM5020 does not have a system event log.
sensor list|read: Show board sensor data
Options:
list:
Display an overview of all available board sensors
read: Display specific sensor data
raw [<bytes> <...>]: Execute raw IPMI command
Syntax:
raw [NetFn] [LUN] [COMMAND] ...
rawsendmessage [<bytes> <...>]: Execute raw SendMessage
command
Syntax:
rawsendmessage [rsSa] [CHANNEL] [NetFn] [LUN]
[COMMAND] ...
info: Display IPMI firmware information
kipmi (continued)