Kontron COMe Ref.Carrier-i T10 - Manual (Page 17)

COMe Reference Carrier-i Type 10 / Connectors and Features
14
5 Connectors and Features
5.1 Power Supply
5.1.1 VCC
The COM Express® Reference Carrier Board‟s power supply is a single supply connection with two possible connectors.
The standard connector is a pin ring type with 2.1mm pin.
Optionally a 3.5mm pitch horizontal PCB header can be equipped.
Connector Type Matching Connector
J34 Cliff: DC10A Cliff: DCPP1
J35 (optional) Phoenix Contact: MC 1,5/ 2-G-3,5 (1844210) Phoenix Contact: MC 1,5/ 2-ST-3,5 (1840366)
Connector Pin Signal
J34
1 (Pin) VCC
2 (Shield) GND
J35
1 VCC
2 GND