Kontron COMe Eval Carrier T10 - Manual (Page 47)

COM Express® Eval Type 10 / Connectors and Features
44
5.18.4 SIO Debug connectors
For debugging Winbond 83627 LPC-I/O GPIOs and FAN/Voltage interfaces are available via pin-header.
Pin J72 - GPIO J81 - FAN J82 - Voltage
1 +5V +3.3V SIO HWM IN - VCOREA
2 GND GND SIO HWM IN - 12V
3 SIO GP10 / JOAYABTN0 Module FAN_PWMOUT# SIO HWM IN - VCOREB
4 SIO GP11 / JOYBBTN0 Module FAN_TACHIN SIO HWM IN - -5V
5 SIO GP12 / JOYAX SIO HWM OUT - FANPWM1 SIO HWM IN - 3.3V
6 SIO GP13 / JOYBX SIO HWM IN - FANIO1 GND
7 SIO GP14 / JOYBY SIO HWM OUT - FANPWM2 -
8 SIO GP15 / JOYAY SIO HWM IN - FANIO2 -
9 SIO GP16 / JOYBBTN1
SIO GP20 / MDRX SIO HWM OUT - FANPWM3 -
10 SIO GP17 / JOYABTN1
SIO IRQIN / MDTX0 SIO HWM IN - FANIO3 -
Note: Check the module's BIOS how to enable the baseboard hardware monitor for monitoring voltages and fan
revolutions via JIDA32/K-Station or in BIOS HWM setup page.
SIO GPIOs are not accessible via JIDA interface.