Kontron COMe Eval Carrier T10 - Manual (Page 51)

COM Express® Eval Type 10 / Module Single Supply and Wide Range
48
7 Module Single Supply and Wide Range
The Computer-on-Module power is supplied directly from ATX_12V connector J15. Kontron modules are capable of
working in a wide range voltage input and therefore it's possible to connect module VCC on J15 parallel to ATX supply
J22 for the baseboard.
Please check the documentation of your product if a wide range voltage input is supported. Kontron Computer-on-
Modules usually supports:
» COM Express® modules in mini size form factor:
4.75V to 14V
» COM Express® modules in compact and basic size form factor
8.5V to 18V
Additionally Kontron modules support single supply operation without standby voltage. To enable module single
supply mode open jumper:
» J66 to enable Baseboard's S5Eco mode
» J67 to disconnect 5VSB from the module
» J71 to disconnect Power Good (PWR_OK)