Kontron COMe-cHL6 - Manual (Page 15)

COMe-cHL6 / Product Specification
Graphics Core
The integrated Intel® HD/HD4400/HD5000 (Gen7.5) supports:
Graphics Core Render Clock GT1/GT2; Base clock: 200 MHz; GT Turbo: up to 1100 MHz
Execution Units / Pixel Pipelines GT2: 20EU / GT1: 10EU
Max Graphics Memory 1720MB
GFX Memory Bandwidth (GB/s) 25.6
GFX Memory Technology DVMT
API (DirectX/OpenGL) 11.1 / 4.0 + OCL 1.2
Shader Model 5.0
Hardware accelerated Video MPEG2, VC-1, AVC, Blu-ray (+3D)
Independent/Simultaneous Displays 3
Display Port DP 1.2 / eDP 1.3
HDCP support HDCP 1.4a
Monitor output
CRT max Resolution -
TV out: -
LVDS
LVDS Bits/Pixel 1x18/24, 2x18/24 with DP2LVDS
LVDS Bits/Pixel with dithering -
LVDS max Resolution: 1920x1200
PWM Backlight Control: YES
Supported Panel Data: JILI2/JILI3/EDID/DID
Display Interfaces
Discrete Graphics -
Digital Display Interface DDI1 DP++
Digital Display Interface DDI2 DP++
Digital Display Interface DDI3 -
Maximum Resolution on DDI HDMI: 4096x2304, DP: 3200x2000
Storage
onboard SSD -
SD Card support -
IDE Interface -
Serial-ATA 4x SATA 6Gb/s
SATA AHCI AHCI with NCQ, HotPlug, Staggered Spinup, eSATA, PortMultiplier
SATA RAID 0, 1, 5, 10
If SATA AHCI or RAID is disabled in setup, the SATA Interface only supports 3Gb/s transfer
rate and Staggered Spin-Up. To configure a RAID enable RAID support in BIOS Chipset/SATA
settings, connect at least two hard drives and enter the RAID Option ROM by pressing
'CTRL'+'I'
15