Kontron COMe-cHL6 - Manual (Page 81)

COMe-cHL6 / BIOS Operation
H/W Monitor
Feature Value/Options Description
CPU Temperature xx°C Shows the measured temperature of the CPU Diode with
onboard HWM
Module Temperature xx°C Shows the internal hardware-monitor temperature
CPU FAN xxxx rpm Shows the fan speed of onboard FAN connector
Fan Pulse 2 Number of pulses the CPU fan produces during one
revolution. Range 1-4
FAN Control Disabled
Manual
Auto Set fan control mode. 'Disable' will totally stop the fan
Fan Trip Point 45 Temperature where fan accelerates. Range 20 - 80°C
Fan Speed 70 Manual fan speed in %. Minimum value is 30 (in Manual
mode only)
Trip Point Speed 50 Fan speed at trip point in %. Minimum value is 30. Fan
always runs at 100% at Tjmax - 10°C
Reference Temperature CPU Temperature
PCH Temperature
Module Temperature
Determines the temperature source which is used for
automatic fan control
External FAN xxxx rpm Shows the fan speed of external COMe FAN
Fan Pulse 2 Select the number of pulses the external fan produces
during one revolution. Range 1-4
FAN Control Disabled
Manual
Auto
Set fan control mode. 'Disable' will totally stop the fan
Fan Trip Point 45 Temperature where fan accelerates. Range 20 - 80°C
Fan Speed 70 Manual fan speed in %. Minimum value is 30 (in Manual
mode only)
Trip Point Speed 50 Fan speed at trip point in %. Minimum value is 30. Fan
always runs at 100% at Tjmax - 10°C
Reference Temperature PCH Temperature
Module Temperature
CPU Temperature
Determines the temperature source which is used for
automatic fan control
81