Fig. 33, 8 and fig. 34 – Kontron KISS 4U X9DR3 User Manual
Page 32
8. Assembly, Disassembly
KISS 4U V2 EATX – User's Guide (Version 1.02)
To install or remove an expansion card, perform the following steps:
1. Turn your system off and disconnect it from the AC main power supply.
In order to remove the cover, unscrew the following knurled screws:
the cover fastening screw (Fig. 11, pos. 11 and Fig. 33) on the front side
the knurled screws (Fig. 20, Fig. 21, pos. 8 and Fig. 34)on the rear side
2. Loosen the knurled screws (the cover fastening screw on the front side and the two knurled screws on the rear side)
which secure the cover (see Fig. 33 and Fig. 34) to the chassis.
Fig. 33: Loosening the knurled cover fastening screw on the front side (shown with KTC 5520 motherboard)
Fig. 34: Loosening the knurled screw on the rear side (shown with KTC 5520 motherboard)
30
www.kontron.com