Kontron OmniView - Manual (Page 31)

OmniView – User’s Guide (V1.)
30 www.kontron.com
11.5. DP Connectors (DP0/DP1)
The DP (Display Port) is based on standard DP type Foxconn 3VD51203-H7JJ-7H or Similar.
Figure 3. DP Connector, front view
Pin No. Signal Description Type Note
1 Lane 0 (p) LVDS
2 GND PWR
3 Lane 0 (n) LVDS
4 Lane 1 (p) LVDS
5 GND PWR
6 Lane 1 (n) LVDS
7 Lane 2 (p) LVDS
8 GND PWR
9 Lane 2 (n) LVDS
10 Lane 3 (p) LVDS
11 GND PWR
12 Lane 3 (n) LVDS
13 Config1 Aux or DDC
selection I
14 Config2 (Not used) O
15 Aux Ch (p) Aux Channel (+) or
DDC Clk AUX (+) channel used by DP
DDC Clk used by HDMI
16 GND PWR
17 Aux Ch (n) Aux Channel (-) or
DDC Data AUX (-) channel used by DP
DDC Data used by HDMI
18 Hot Plug I Internally pull down (100Kohm).
19 Return PWR Same as GND
20 3.3V PWR Fused by 1.5A resetable PTC fuse, common
for DP0 and DP1