Lifesmart LS-4CH-SIQT-D - Manual (Page 13)

13
6. To engage the fan only mode, start the unit and
repeatedly press the Mode / Heat button on the
control panel (C) or remote control (B).
Note: The Hi / Low fan speed can only be changed when
the heater is in fan only mode.
The digital display on the control panel (C) changes
from the set mode readout to an illuminated fan icon.
Switch from high or low fan speed settings by
pressing the Fan button on the control panel (C) or
remote control (B).
The oscillating grill located on the top vent only can
be enabled while the unit is in fan mode by pressing
the oscillation button on the control panel (C) to help
direct airflow in different directions.
6
HIGH LOW ECO
HEAT
C B
C B
C
7. To replace the batteries, remove the battery cover
(1) from the remote (B) by applying pressure to the
battery cover (1) and sliding it away from the remote
(B). Insert two AAA batteries (not included) (2) and
close the remote by placing the battery cover (1)
back on the remote (B).
7
B
1 2