Pprro og grra am mm miin ng g o op pttiio on nss – CLIFFORD Matrix 12 User Manual

Page 37

Advertising
background image

32

© 2 0 0 6 d i r e c t e d e l e c t r o n i c s

twice.

If the system has entered the triggered sequence (siren has begun

chirping), pressing the disarm button of the Remote Control will

not disarm VRS

®

. To disarm the VRS

®

during a VRS

®

trigger

sequence:

1. Turn the ignition on.

2. Press the Valet button the pre-

programmed number of times to

disarm the VRS

®

system.

p

prro

og

grra

am

mm

miin

ng

g o

op

pttiio

on

nss

See your dealer for further details on the options listed below

available with this system.

Automatic Engine Disable

: Prevents the vehicle from being started

even if the vehicle is not armed after turning the ignition Off and

exiting the vehicle.

Comfort Closure

: Windows will close upon locking the vehicle.

Dual Sensor Trigger

: If programmed both the onboard and at

least one of the optional sensors need to be triggered within 1-

note: If the VRS

®

system has begun its chirping sequence,

the ignition must be turned off, then on to disarm. If you
are driving the vehicle at the time, pull to a safe place
away from traffic and follow the triggered sequence dis-
arm procedure.

DRW-35

Advertising