Losi LOSB0126 - Manual (Page 2)

2
4) Plug the battery into the R.O.S.S. unit in the
battery box. Arrange the wires as shown in
the photos and replace the battery in the
battery box and secure the top with the two
wire clips. Plug in the large white plug halves
and place the wires into the clips on the top
of the cover.
5) Find a large wide open area for the first run of
your Ten-T.
6) Fill the fuel bottle by squeezing the sides
together and sticking the fill tube into the
can of Nitrotane ™ 20% Sport fuel. As you
relax your grip on the bottle sides, fuel will be
drawn into the bottle.
7) Open the lid on the fuel tank, insert the filler
tube and squeeze the bottle, forcing fuel into
the tank. As the fuel level approaches the top,
relax the squeezing and pull the fill tube out.
Replace the cap on the fuel bottle and set it
aside.