Losi LOSB0126 User Manual
Page 3
3
8) Turn on the transmitter and check for proper
voltage at the upper right corner of the
screen. Turn on the model and check for
proper voltage at the lower end of the screen.
9) With the front tires off the ground, turn
the steering wheel left to right. The wheels
should turn smoothly and with ease. Also
operate the throttle and brake, checking
for quick smooth operation. Do not try to
operate your truck if any of the servos or any
part of the radio is not operating correctly.
If the servos operate slowly the batteries
are low and must be recharged. Never try to
operate the model if either the transmitter or
receiver batteries are low.
Steering
Throttle
10) Place the model on the ground. Use your
thumb to depress the starter button on the
back of the transmitter. This will energize the
R.O.S.S. starting system. You should be able
to see fuel travel from the fuel tank to the
carburetor in a few seconds followed by the
engine starting to fire.