Driving and parking, Driving systems – Mercedes-Benz CLA-Class 2015 User Manual

Page 195

Advertising
background image

The functionality of ATTENTION ASSIST is

restricted and warnings may be delayed or

not occur at all:

R

if the length of the journey is less than

approximately 30 minutes

R

if the road condition is poor, e.g. if the sur-

face is uneven or if there are potholes

R

if there is a strong side wind

R

if you have adopted a sporty driving style

with high cornering speeds or high rates of

acceleration

R

if you are predominantly driving slower

than 37 mph (60 km/h) or faster than

125 mph (200 km/h)

R

if the time has been set incorrectly

R

in active driving situations, such as when

you change lanes or change your speed

ATTENTION ASSIST is reset when you con-

tinue your journey and starts assessing your

tiredness again if:

R

you switch off the engine

R

you take off your seat belt and open the

driver's door, e.g. for a change of drivers or

to take a break

Displaying the attention level

You can have current status information dis-

played in the assistance menu (

Y

page 209)

of the on-board computer.

X

Select the Assistance display for Attention

Assist using the on-board computer

(

Y

page 209).

The following information is displayed:

R

length of the journey since the last break.

R

the attention level determined by ATTEN-

TION ASSIST (

Attention Level

Attention Level

), dis-

played in a bar display in five levels from

high to low

R

If ATTENTION ASSIST is unable to calculate

the attention level and cannot issue a warn-

ing, the

System Suspended

System Suspended

message

appears. The bar display then changes the

display, e.g. if you are driving at a speed

below 37 mph (60 km/h) or above 124 mph

(200 km/h).

Activating ATTENTION ASSIST

X

Activate ATTENTION ASSIST using the on-

board computer (

Y

page 210).

The system determines the attention level

of the driver depending on the setting

selected:

Selection

Standard

Standard

: the sensitivity with

which the system determines the attention

level is set to normal.
Selection

Sensitive

Sensitive

: the sensitivity is set

higher. The attention level detected by Atten-

tion Assist is adapted accordingly and the

driver is warned earlier.
When ATTENTION ASSIST is deactivated, the

é symbol appears in the multifunction

display in the assistance graphic display.
When ATTENTION ASSIST has been deactiva-

ted, it is automatically reactivated after the

engine has been stopped. The sensitivity

selected corresponds to the last selection

activated (standard/sensitive).

Warning in the multifunction display

If fatigue or increasing lapses in concentra-

tion are detected, a warning appears in the

multifunction display:

ATTENTION ASSIST

ATTENTION ASSIST

Take a Break!

Take a Break!

.

In addition to the message shown in the mul-

tifunction display, you will then hear a warn-

ing tone.

Driving systems

193

Driving

and

parking

Z

Advertising