Roa ds id e assist ance, Towing and tow-starting – Mercedes-Benz CLA-Class 2015 User Manual

Page 315

Advertising
background image

X

Remove the towing eye from the stowage

space.
The towing eye is located with the vehicle

tool kit under the luggage compartment

floor (

Y

page 300).

Vehicles with the TIREFIT kit: the towing

eye is beneath the tire inflation compres-

sor.

X

Press the mark on cover : inwards in the

direction of the arrow.

X

Take cover : off the opening.

X

Screw in the towing eye clockwise to the

stop.

Removing the towing eye

X

Unscrew and remove the towing eye.

X

Attach cover : to the bumper and press

until it engages.

X

Place the towing eye in the stowage well

(

Y

page 300) beneath the cargo compart-

ment floor in the cargo compartment.

X

Vehicles with the TIREFIT kit: put back the

tire inflation compressor.

Towing the vehicle with the front axle

raised

When towing your vehicle with the rear axle

raised, it is important that you observe the

safety instructions (

Y

page 311).

Only vehicles without 4MATIC can be

towed with the front axle raised.

!

Vehicles with 4MATIC must not be towed

with either the front or the rear axle raised,

as doing so will damage the transmission.

Vehicles with 4MATIC may either be towed

away with both axles on the ground or be loa-

ded up and transported.

!

The ignition must be switched off if the

vehicle is being towed with the front axle

raised. Otherwise, ESP

®

may intervene and

damage the brake system.

X

On vehicles with KEYLESS-GO or the

KEYLESS-GO start function: you must

use the SmartKey instead of the Start/Stop

button (

Y

page 143).

X

Make sure that the vehicle is stationary.

X

Turn the SmartKey to position 2 in the igni-

tion lock.

X

When the vehicle is stationary, depress the

brake pedal and keep it depressed.

X

Shift the automatic transmission to posi-

tion P.

X

Release the brake pedal.

X

Release the electric parking brake.

X

Switch off the automatic locking

(

Y

page 212).

X

Switch on the hazard warning lamps

(

Y

page 113).

X

Turn the SmartKey in the ignition lock to

position 0 and leave the SmartKey in the

ignition lock.

Towing a vehicle with both axles on

the ground

It is important that you observe the safety

instructions when towing away your vehicle

(

Y

page 311).

X

On vehicles with KEYLESS-GO or the

KEYLESS-GO start function: you must

use the SmartKey instead of the Start/Stop

button (

Y

page 143).

The automatic transmission automatically

shifts to position P when you open the driver's

or front-passenger door or when you remove

the SmartKey from the ignition lock. In order

to ensure that the automatic transmission

stays in position N when towing the vehicle,

you must observe the following points:

X

Make sure that the vehicle is stationary.

X

Turn the SmartKey to position 2 in the igni-

tion lock.

Towing and tow-starting

313

Roa

ds

id

e

Assist

ance

Z

Advertising