Mercedes-Benz C-Sedan 2015 COMAND Manual - Manual (Page 124)

Saving or editing the contact data on
COMAND does not change the contacts on
the mobile phone. If automatic download-
ing of phone contacts is activated,
COMAND displays the copy ¥ with the
changed data. To add additional data, such
as additional phone numbers or e-mail
addresses, select this contact. In this way,
you avoid creating additional copies of the
mobile phone entry.
Deleting the contact
X Call up the address book (
Y
page 117).
X Search for a contact (
Y
page 117).
X To select G: slide 9 the controller.
X To select Delete Entry Delete Entry : turn and press
the controller.
X To select Yes Yes : turn and press the controller.
The contact is deleted.
or
X To select No No : turn and press the controller.
The process is canceled.
Importing contacts
Information and requirements
Contacts can be imported as vCards (vcf
files). A vCard is an electronic business card.
A memory card, USB device or a Bluetooth ®
connection can be used for importing.
i Up to 2000 entries can be imported into
the address book. A message notifies you
when the maximum number is reached. In
order to be able to then import new con-
tacts, you have to delete existing contacts
(
Y
page 122).
Source Prerequisites
Memory card The SD memory card is
inserted. It contains
importable contact details.
USB device The USB device is inserted
into the USB port. It con-
tains importable contact
details.
Bluetooth ®
connection
If the sending of vCards is
supported via Bluetooth ® ,
vCards can be received on
mobile phones or net-
books, for example.
Bluetooth
® must be acti-
vated in COMAND and on
the respective device (see
the manufacturer's operat-
ing instructions).
Importing from the memory card or USB
device
Contacts imported from the memory card or
from a USB device can be recognized by the
¯ symbol.
The following conditions must be fulfilled in
order to import vCards:
R vCards (vcf files) may be located in the main
directory or in folders. COMAND allows you
to select the relevant folders directly.
R vCards must have the file extension ".vcf".
i COMAND supports vCards in versions 2.1
and 3.0.
X To switch to the menu bar in the telephone
menu or the address book: slide 6 the
controller.
X To select Options Options : turn and press the con-
troller.
122
Address book
Tel
epho
ne