Mercedes-Benz C-Sedan 2015 COMAND Manual - Manual (Page 38)

Your COMAND equipment
These operating instructions describe all
standard and optional equipment available
for your COMAND system at the time of pur-
chase. Country-specific differences are pos-
sible. Please note that your COMAND system
may not be equipped with all the features
described. This also applies to safety-relevant
systems and functions. Therefore, the equip-
ment on your COMAND system may differ
from that in the descriptions and illustrations.
Should you have any questions concerning
equipment and operation, please consult an
authorized Mercedes-Benz Center.
Display settings
Setting the brightness
The brightness detected by the display light
sensor affects the setting options for this
function.
X
Press the Ø button.
The Vehicle Vehicle menu appears.
X To select System Settings System Settings : slide 6 the
controller, turn and press to confirm.
A menu appears.
X To select Display Display : turn and press the con-
troller.
A menu appears.
X Select Brightness Brightness .
A control appears.
X Select the desired brightness.
Display design
The display features optimized designs for
daytime and night-time operation. You can
set the design by manually selecting day or
night design or opt for an automatic setting.
X Press the Ø button.
The Vehicle Vehicle menu appears.
X To select System Settings System Settings : slide 6 the
controller, turn and press to confirm.
A menu appears.
X To select Display Display : turn and press the con-
troller.
A menu appears.
X Select Day Mode Day Mode , Night Mode Night Mode or Auto Auto .
The # dot indicates the current setting.
Design Explanation
Day Mode Day Mode The display is set perma-
nently to day design.
Night Mode Night Mode The display is set perma-
nently to night design.
Automatic Automatic In the Automatic Automatic set-
ting, COMAND evaluates
the readings from the
automatic vehicle light
sensor and automati-
cally switches the dis-
play design.
Switching the display on/off
X Press the Ø button.
The Vehicle Vehicle menu appears.
X To select Display Off Display Off : slide 6 the con-
troller, turn and press to confirm.
The display goes out.
X To switch the display on again: press the
controller.
36
Display settings
Sy
ste
m
se
ttin
gs