Mercedes-Benz CLS-Class 2015 - Manual (Page 212)

R if the area is lit by fluorescent bulbs or LED
lighting (the display may flicker)
R
if there is a sudden change in temperature,
e.g. when driving into a heated garage in
winter
R if the camera lenses are dirty or covered
R if the vehicle components in which the
cameras are installed are damaged. In this
event, have the camera position and setting
checked at a qualified specialist workshop.
Do not use the 360° camera in this case. You
can otherwise injure others or cause damage
to objects or the vehicle.
Guide lines are always shown at road level.
On vehicles with height-adjustable chassis,
depending on technical conditions, leaving
the standard height can result in:
R inaccuracies in the guide lines
R inaccuracies in the display of generated
images (top view)
Activation conditions
The 360° camera image can be displayed if:
R your vehicle is equipped with a 360° cam-
era
R
the SmartKey is in position 2 in the ignition
lock
R COMAND/Audio 20 is switched on
R the 360° Camera 360° Camera function is switched on
Switching on the 360° camera
X
Press the Ø button in the center con-
sole for longer than two seconds.
Depending on whether position D or R is
engaged, the following is shown:
R a split screen with top view and the
image from the front camera or
R
a split screen with top view and the
image from the rear view camera
or
X Press the Ø button in the center con-
sole.
The vehicle menu is displayed.
X Select 360° Camera 360° Camera and press 7 to con-
firm.
Depending on whether position D or R is
engaged, the following is shown:
R
a split screen with top view and the
image from the front camera or
R a split screen with top view and the
image from the rear view camera
Activating the 360° camera using
reverse gear
The 360° camera images can be automati-
cally displayed by engaging reverse gear.
X
Make sure that the SmartKey is in position
2 in the ignition lock.
X Make sure that the Activation by R Activation by R
gear gear function is selected in COMAND/
Audio 20 (see the separate COMAND/
Audio 20 operating instructions).
X
To show the 360° camera image: engage
reverse gear.
The area behind the vehicle is shown in the
COMAND/Audio 20 display in split-screen
mode. You see the top view of the vehicle
and the image from the rear view camera.
Selecting the split-screen and full
screen displays
Switching between split screen views
X
To switch to the line with the vehicle icons:
slide 5 the controller.
X
To select one of the vehicle icons: turn
3 the controller.
X
To switch to 180° View 180° View : turn 3 the
controller to select 180° View 180° View and press
7 to confirm.
i The 180° View 180° View option is only available in
the following views:
210
Driving systems
Driving
and
parking