Mercedes-Benz SL-Class 2014 Owners Manual - Manual (Page 239)

Selecting the permanent display function
You can determine whether the multifunction
display permanently shows your speed or the
outside temperature.
X Press the = or ; button on the
steering wheel to select the Settings Settings
menu.
X Press the : or 9 button to select the
Instrument Cluster Instrument Cluster submenu.
X
Press a to confirm.
X Press the : or 9 button to select the
Permanent Display Permanent Display function.
You will see the selected setting Outside Outside
Temperature Temperature or Additional Additional
Speedometer [km/h] Speedometer [km/h] / Additional Additional
Speedometer [mph] Speedometer [mph] .
X Press the a button to save the setting.
i The speed is displayed in km/h/mph.
Lights
Setting the daytime running lamps
i This function is not available in Canada.
X Press the = or ; button on the
steering wheel to select the Sett Sett menu.
X Press the : or 9 button to select the
Lights Lights submenu.
X Press a to confirm.
X Press the : or 9 button to select the
Daytime Running Lights Daytime Running Lights function.
If the Daytime Running Lights Daytime Running Lights function
has been switched on, the cone of light and
the W symbol in the multifunction
display are shown in orange.
X Press the a button to save the setting.
Further information on daytime running
lamps (
Y
page 126).
Switching Adaptive Highbeam Assist on/
off
X
Press the = or ; button on the
steering wheel to select the Sett Sett menu.
X
Press the : or 9 button to select the
Lights Lights submenu.
X Press a to confirm.
X
Press the : or 9 button to select the
Adaptive Highbeam Adaptive Highbeam function.
If the Adaptive Highbeam Adaptive Highbeam function has
been switched on, the cone of light and the
_ symbol in the multifunction display
are shown in orange.
X Press the a button to save the setting.
For further information about Adaptive
Highbeam Assist, see (
Y
page 132).
Switching the spotlight function on or off
X Press the = or ; button on the
steering wheel to select the Settings Settings
menu.
X
Press the : or 9 button to select the
Lights Lights submenu.
X Press a to confirm.
X Press the : or 9 to select the
Spotlight Spotlight function.
When the spotlight function is activated,
the assistance graphic shows the
pedestrian symbol.
X
Press the a button to save the setting.
Further information on the spotlight function
of Night View Assist Plus (
Y
page 217).
Setting the brightness of the ambient
lighting
X
Press the = or ; button on the
steering wheel to select the Settings Settings
menu.
X Press the : or 9 button to select the
Lights Lights submenu.
X Press a to confirm.
X Press the : or 9 button to select the
Amb. Light +/- Amb. Light +/- function.
You will see the selected setting.
Menus and submenus
237
On-board
computer
and
displays
Z