Driving and parking, Driving systems – Mercedes-Benz M-Class 2014 Owners Manual User Manual

Page 199

Advertising
background image

pressure point for a higher speed or down

= for a lower speed.

Every time the cruise control lever is

pressed up or down, the last speed stored

is increased or reduced.

or

X

To adjust the set speed in 5 mph

increments (10 km/h increments):

briefly press the cruise control lever

up : past the pressure point for a higher

speed or down = for a lower speed.

Every time the cruise control lever is

pressed up or down, the last speed stored

is increased or reduced.

X

Remove your foot from the accelerator

pedal.

Your vehicle adapts its speed to that of the

vehicle in front, but only up to the desired

stored speed.

When driving at speeds below 20 mph

(30 km/h), you can only activate DISTRONIC

PLUS if the vehicle in front has been detected

and is shown in the multifunction display. If

the vehicle in front is no longer detected and

displayed, for example because it has

changed lanes, DISTRONIC PLUS is

deactivated. You will hear a warning tone if

this is the case.

i

If you do not fully release the accelerator

pedal, the

DISTRONIC PLUS Passive

message appears in the multifunction

display. The set distance to a slower-

moving vehicle in front will then not be

maintained. You will be driving at the speed

you determine by the position of the

accelerator pedal.

Activating at the current speed/last

stored speed

G

WARNING

If you call up the stored speed and it differs

from the current speed, the vehicle

accelerates or decelerates. If you do not know

the stored speed, the vehicle could accelerate

or brake unexpectedly. There is a risk of an

accident.
Pay attention to the road and traffic

conditions before calling up the stored speed.

If you do not know the stored speed, store the

desired speed again.

X

Briefly pull the cruise control lever towards

you :.

X

Remove your foot from the accelerator

pedal.

DISTRONIC PLUS is activated. The first

time it is activated, the current speed is

stored. Otherwise, it sets the vehicle cruise

speed to the previously stored value.

Driving with DISTRONIC PLUS

Pulling away and driving

Driving systems

197

Driving

and

parking

Z

Advertising