Safety, Children in the vehicle – Mercedes-Benz M-Class 2014 Owners Manual User Manual

Page 66

Advertising
background image

installation instructions and the instructions

for correct use of the child restraint system.

!

When installing the LATCH-type (ISOFIX)

child restraint system, make sure that the

seat belt for the center seat does not get

trapped. Otherwise, the seat belt could be

damaged.

X

Install the LATCH-type (ISOFIX) child

restraint system on both LATCH-type

(ISOFIX) securing rings :. Comply with the

child restraint system manufacturer's

instructions when installing the LATCH-

type (ISOFIX) child restraint system.

LATCH-type (ISOFIX) is a standardized

securing system for specially designed child

restraint systems on the rear seats. Securing

rings : for two LATCH-type (ISOFIX) child

restraint systems are installed on the left and

right of the rear seats.
Non-LATCH-type (ISOFIX) child seats may

also be used and can be installed using the

vehicle's seat belt system. Install the child

seat according to the manufacturer's

instructions.

Top Tether

Top Tether anchorages

G

WARNING

If the rear seat backrests are not locked, they

could fold forwards in the event of an

accident, heavy braking or sudden changes of

direction. As a result, child restraint systems

cannot perform their intended protective

function. Rear seat backrests that are not

locked can also cause additional injuries, e.g.

in the event of an accident. This poses an

increased risk of injury or even fatal injury.
Always lock rear seat backrests after

installing a Top Tether belt. Observe the lock

verification indicator. Adjust the rear seat

backrests so that they are positioned

vertically.

Top Tether provides an additional connection

between the LATCH-type (ISOFIX) child

restraint system secured with LATCH-type

(ISOFIX) and the rear seat. This helps reduce

the risk of injury even further. If the LATCH-

type (ISOFIX) child restraint system is

equipped with Top Tether, this should always

be used.
The Top Tether anchorage points are installed

on the rear side of the rear seat backrests.

X

Move head restraint = upwards.

X

Install the LATCH-type (ISOFIX) child

restraint system with Top Tether. Always

comply with the child restraint system

manufacturer's installation instructions

when doing so.

64

Children in the vehicle

Safety

Advertising