Opening and closing, Side windows – Mercedes-Benz CL-Class 2014 Owners Manual User Manual

Page 92

Advertising
background image

closing procedure, press and hold the

& button.

Vehicles with KEYLESS-GO:

R

Release the sensor surface on the outside

door handle to stop the closing procedure.

R

Immediately pull on the same outside door

handle and hold firmly. The door windows

and the sliding sunroof will open for as long

as the door handle is held but the door is

not opened.

Using the SmartKey

i

The SmartKey must be close to the

driver's door handle.

X

Point the tip of the SmartKey at the driver's

door handle.

X

Lock the vehicle by pressing the &

button.

X

Press and hold the & button until the

side windows and the sliding sunroof are

fully closed.

X

Make sure that all the side windows and the

sliding sunroof are closed.

X

To interrupt the convenience closing:

release the & button.

Using KEYLESS-GO

The KEYLESS-GO key must be outside the

vehicle but must not be further than 3 ft (1 m)

from a door.

X

Close all the doors.

X

Touch sensor surface : on the door

handle until the side windows and the

sliding sunroof are fully closed.

i

Make sure you only touch sensor

surface :.

X

Make sure that all the side windows and the

sliding sunroof are closed.

X

To interrupt convenience closing:

release sensor surface : on the door

handle.

Resetting the side windows

You must reset each side window if:

R

the front side window does not close

automatically.

R

the side window reopens slightly after

having been closed manually.

X

Close all the doors.

X

Turn the SmartKey to position 1 in the

ignition lock.

X

Pull the corresponding switch on the door

control panel until the side window is

completely closed (

Y

page 89).

X

Hold the switch for an additional second.

If the side window opens again slightly:

X

Immediately pull the corresponding switch

on the door control panel until the side

window is completely closed (

Y

page 89).

X

Hold the switch for an additional second.

X

If the respective side window remains

closed after the button is released, then it

has been set correctly. If this is not the

case, repeat the previously described

steps.

90

Side windows

Opening

and

closing

Advertising