Mercedes-Benz E-Cab 2013 Owners Manual - Manual (Page 144)

Setting the temperature
Climate control
Different temperatures can be set for the
driver's and front-passenger sides.
X Turn the SmartKey to position 2 in the
ignition lock.
X To increase/reduce: press switch E or
H up or down (
Y page 137).
Only change the temperature setting in
small increments. Start at 72 ‡ (22 † ).
3-zone automatic climate control
Automatic climate control zones
You can select different temperature settings
for the driver's and front-passenger sides as
well as for the rear compartment.
X Turn the SmartKey to position 2 in the
ignition lock.
X To increase/reduce the temperature in
the front compartment: press switch F
or J up or down (
Y page 139).
Only change the temperature setting in
small increments. Start at 72 ‡ (22 † ).
X To increase/reduce the temperature in
the rear compartment using the front
control panel: press the á button.
The indicator lamp above the á button
goes out.
X Press switch F or J up or down
(
Y page 139).
Only change the temperature setting in
small increments. Start at 72 ‡ (22 † ).
X To increase/reduce the temperature in
the rear compartment using the rear
control panel: press button K or
M(
Y page 139).
Only change the temperature setting in
small increments. Start at 72 ‡ (22 † ).
Setting the air distribution
Air distribution settings
P Directs air through the center and side
air vents
O Directs the airflow through the
footwell air vents
S Directs the airflow through the center,
side and footwell air vents (Cabriolet
only)
¯ Directs air through the defroster vents
b Directs airflow through the defroster,
center and side air vents (Cabriolet or
Coupe only: only for certain countries)
a Directs air through the defroster and
footwell vents
i Regardless of the air distribution setting,
airflow is always directed through the side
air vents. The side air vents can only be
closed when the controls on the side air
vents are turned downwards.
Climate control
X Turn the SmartKey to position 2 in the
ignition lock.
X Press switch F up or down repeatedly until
the desired symbol appears in the display
(
Y page 137).
142
Operating the climate control systems
Climate control