Towing the vehicle with the rear axle raised, Towing a vehicle with both axles on the ground, Breakdown assistance – Mercedes-Benz E-Cab 2013 Owners Manual User Manual

Page 318: Towing and tow-starting

Advertising
background image

Example: Cabriolet, towing eye covers

The mountings for the removable towing eyes
are located in the bumpers. They are at the
front and at the rear, under the covers.

X

Remove the towing eye from the vehicle
tool kit (

Y

page 308).

X

Press the mark on cover : inwards in the
direction of the arrow.

X

Take cover : off the opening.

X

Screw the towing eye in clockwise to the
stop and tighten it.

Removing the towing eye

X

Loosen the towing eye and unscrew it.

X

Attach cover : to the bumper and press
until it engages.

X

Place the towing eye in the vehicle tool kit.

Towing the vehicle with the rear axle

raised

!

The ignition must be switched off if you

are towing the vehicle with the rear axle
raised. Intervention by ESP

®

could

otherwise damage the brake system.

Only possible on vehicles without

4MATIC.

X

Switch on the hazard warning lamps
(

Y

page 125).

X

Turn the SmartKey to position

0 in the

ignition lock and remove the SmartKey
from the ignition lock.

X

When leaving the vehicle, take the
SmartKey or the KEYLESS-GO key with you.

When towing your vehicle with the rear axle
raised, it is important that you observe the
safety instructions (

Y

page 315).

Towing a vehicle with both axles on

the ground

G

WARNING

The power assistance for the steering and the
brake force booster do not work when the
engine is not running. You will then need
much more effort to brake and steer the
vehicle. Adapt your style of driving
accordingly.

It is important that you observe the safety
instructions when towing away your vehicle
(

Y

page 315).

X

Switch on the hazard warning lamps
(

Y

page 125).

i

When towing with the hazard warning

lamps switched on, use the combination
switch as usual to signal a change of
direction. In this case, only the turn signals
for the desired direction flash. When the
combination switch is reset, the hazard
warning lamps start flashing again.

X

Turn the SmartKey to position

2 in the

ignition lock.

X

When the vehicle is stationary, depress the
brake pedal and keep it depressed.

X

Shift the automatic transmission to
position

N.

X

Release the brake pedal.

X

Release the parking brake.

316

Towing and tow-starting

Breakdown assistance

Advertising
This manual is related to the following products: