Mercedes-Benz C-Coupe 2012 COMAND Manual - Manual (Page 124)

Redialing
On COMAND
X Call up the telephone basic menu
(
Y
page 119).
X
Select ° in the character bar and press
W to confirm.
or
X If the telephone basic menu is displayed,
press the 6 button in COMAND.
In both cases, the calls dialed list appears.
The most recently dialed number is at the
top.
X
To select a call: turn cVd the COMAND
controller.
X
To connect the call: press W the
COMAND controller.
Connecting a call to an entry in a call list
or in the COMAND phone book
X Open a call list and select an entry
(
Y
page 129).
or
X Call up the COMAND phone book and
select an entry (
Y
page 126).
X To connect a call: press W the COMAND
controller or the 6 button.
Making a call via speed dial
The speed dial list contains stored phone
book entries (
Y
page 131).
Option 1:
X
Hold down one of the number keys for
longer than two seconds.
Option 2:
X Call up the telephone basic menu
(
Y
page 119).
X Select Call Lists by sliding VÆ and
turning cVd the COMAND controller and
press W to confirm.
The speed dial list appears.
X Select Speed Dial Preset List by
turning cVd the COMAND controller and
press W to confirm.
The speed dial list appears.
X Select the storage location and press W to
confirm.
Irrespective of the option chosen, the
telephone basic menu appears and
displays the selected entry. This initiates
dialing.
Functions available during a call
Overview
Telephone operation with a single call
:
Person you are calling
; Icon for active telephone connection
= To switch hands-free microphone on/off
? To send DTMF tones (not possible with all
mobile phones)
A To end a call
The following functions:
R accepting a waiting call
R making a further call
R call waiting
are available if they are supported by the
network (only possible with a GSM network)
and your Bluetooth ® mobile phone.
122
Telephone operation
Telephone