Navigat ion, Destination entry – Mercedes-Benz C-Coupe 2012 COMAND Manual User Manual
Page 67
Selection
Step
From POIs
X
Enter a point of
interest
(
Y
page 66).
From Personal
POIs
X
Enter a
destination from
the personal
points of interest
(
Y
page 75).
Using Map
X
Enter a
destination using
the map
(
Y
page 61).
Using Geo-
Coordinates
X
Enter a
destination using
the geo-
coordinates
(
Y
page 62).
When the entry is complete, the waypoint
appears.
X
To accept the waypoint: confirm
OK
by
pressing W.
X
To display the details: select
Details
by
turning cVd the COMAND controller and
press W to confirm.
X
To make a call: select
Call
with the
COMAND controller and press W to
confirm. COMAND switches to telephone
mode (
Y
page 122).
i
This menu item is available if the waypoint
has a telephone number and a mobile
phone is connected to COMAND
(
Y
page 116).
X
To call up the map: select
Map
with the
COMAND controller and press W to
confirm.
X
You can move the map and select the
destination.
X
To store the waypoint in the destination
memory: select
Presets
with the
COMAND controller and press W to
confirm.
When you have accepted the waypoint, it is
entered in the waypoint menu. The example
shows the menu with two entered waypoints.
Waypoint menu with two waypoints
Editing waypoints
You can:
R
change waypoints
R
change the sequence in the waypoint menu
R
delete waypoints
To change the sequence, both waypoints
must be entered.
X
To change waypoints: select the symbol
for waypoint 1 or 2 in the waypoint menu
by turning cVd the COMAND controller
and press W to confirm.
X
Select
Edit
and press W to confirm.
X
Use one of the destination entry options
offered.
Destination entry
65
Navigat
ion
Z